uncivil 0 Posted August 23, 2015 I have an MH721 I ran fine on windows 7. My wife clicked the upgrade button and neither of us thought about the plotter not working. Now I am having troubles getting it to work. Any ideas, suggestions or help I. Getting Windows 10 to operate it? Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted August 23, 2015 Roll it back to Windows 7, There are no Windows 10 drivers for the cutters yet.. Share this post Link to post Share on other sites
knucklehead 530 Posted August 24, 2015 MS said they're 'giving' you 30 days to go back. Such a nice company. Share this post Link to post Share on other sites
MadHatterGraphix 1,258 Posted August 24, 2015 Roll it back to Windows 7, There are no Windows 10 drivers for the cutters yet.. So how am I cutting with Win10 with my Graphtec? Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted August 24, 2015 So how am I cutting with Win10 with my Graphtec? All of the problems have been with the value cutters MH SC, Laserpointer 11 that people have posted with,, Windows 10... DEAD IN THE WATER>>>> http://forum.uscutter.com/index.php?/topic/49546-titan-2-and-windows-10-not-working/?hl=%2Bwindows+%2B10 Share this post Link to post Share on other sites
signyouup 178 Posted August 24, 2015 Besides Windows 10 is spyware unless you go into setup and manually opt out of a few things. 1 Share this post Link to post Share on other sites
MadHatterGraphix 1,258 Posted August 25, 2015 All of the problems have been with the value cutters MH SC, Laserpointer 11 that people have posted with,, Windows 10... DEAD IN THE WATER>>>> http://forum.uscutter.com/index.php?/topic/49546-titan-2-and-windows-10-not-working/?hl=%2Bwindows+%2B10 Mz Skeeter ok that's what you meant yeah don't upgrade then. Hope for those with value cutters keep win 8 or lower. Share this post Link to post Share on other sites
uncivil 0 Posted August 30, 2015 I rolled back and it's working fine. We were just hoping to move the plotter from out bedroom into the spare room and run it off the wife's new laptop she uses for her embroidery machine. But I guess until drivers come available we will keep it in here. Thanks for the help! I wanted to avoid roll back but that seemed the only working option. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted August 30, 2015 So how am I cutting with Win10 with my Graphtec? like skeeter said the value cutters with the usb emulation chipset are having the trouble communicating - the higher end cutters with a true usb communication chipset seem to be working fine Share this post Link to post Share on other sites
Jburns 239 Posted August 30, 2015 Has anyone tried while running windows 10: 1. Right click the software icon. 2. Properties- comapatbility- run as windows 7? I did this for my flexi software- made for XP that i run on windows 7 Edit: i restarted the computer after doing the above. 2 Share this post Link to post Share on other sites
Crystal 0 Posted May 23, 2016 I had my computer on and was not attending it...windows 10 got installed and my MH721 would no longer work...rolled it back to Win 7 but it is still not working...what do I need to do? Help! Share this post Link to post Share on other sites
VinylRevamp 93 Posted May 23, 2016 Same here Crystal. I left my house and when I returned, windows 10 was installing. I used Jburns idea and it works with win10! 1 Share this post Link to post Share on other sites
nmgdlr 0 Posted June 15, 2016 Hi, I just did what explains the friend -Jburns- but unfortunately still have the problem. So I went to the Control Panel Window 10 -Device Manager- and explains that: The Third-party INF does not Contain Information- digital signature. I'm sorry, but if for some reason someone manages to control the plotter in Windows 10 would be very generous of you who will post an explanation of how he did it. Regards! (In what I have sent them an answer! ... Meanwhile ... will be tranajar in Window Happy day! Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted June 15, 2016 Hi, I just did what explains the friend -Jburns- but unfortunately still have the problem. So I went to the Control Panel Window 10 -Device Manager- and explains that: The Third-party INF does not Contain Information- digital signature. I'm sorry, but if for some reason someone manages to control the plotter in Windows 10 would be very generous of you who will post an explanation of how he did it. Regards! (In what I have sent them an answer! ... Meanwhile ... will be tranajar in Window Happy day! welcome from the US of A 2 Share this post Link to post Share on other sites
nnancyyta 0 Posted June 28, 2016 welcome from the US of A You mean? ... Finished the game with Windows 10? Share this post Link to post Share on other sites