Andy1112 0 Posted August 1, 2015 So I recently purchased a SC34 and it was worming great when I first got it. Today I woke up and had to get a few things printed but its not working at all. It is plugged in through usb and recognizes I have something plugged in but nothing works. When I tried to reinstall the drivers it says something about elevation. Im not sure what that means either. Share this post Link to post Share on other sites
mr300s 1,272 Posted August 1, 2015 I dont have one of those but have you tried a factory reset sometimes that will work. do a on line search if you dont have the manual to see how to do the reset ... Share this post Link to post Share on other sites
slice&dice 2,450 Posted August 1, 2015 Hi Andy. Welcome to the forum. What elevation are you at? Share this post Link to post Share on other sites
skarekrow 1,842 Posted August 1, 2015 QUOTE "... had to get a few things printed but its not working at all... it says something about elevation. " Have you checked the 'ink elevation'? man, nothing but crickets. This is getting to be a tough room. 1 Share this post Link to post Share on other sites