Willmac1.wm 6 Posted August 11, 2014 I'm looking for a product that looks as close as possible to a mirror. I found chrome vehical wrap that looks like a mirror but it's a fortune. I don't need it to conform, it will be mounted on coroplast or alumalight. I think avery has a 2mil product that is rather cheap but I have never seen it in person. If Any One Has Any ideas It Would Be Appreciated. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted August 11, 2014 I use Avery mirror chrome, and it is shiny like a mirror, but it is 3 mil, and only for flat surfaces I have to bump up the force on my cutter over Oracal 651 http://graphics.averydennison.com/content/dam/averydennison/graphics/na/en/documents/Product-Data-Sheets-NA-ONLY/SandC/Specialty-Films/PDS-SF-100-Metallized-Vinyl-cr-mw-rev-1-11-26-13.pdf Share this post Link to post Share on other sites
Willmac1.wm 6 Posted August 11, 2014 Thanks for the info. I'm perfectly fine with it being thick. I think in the case of what I'm trying to do it will be better. Can you say how durable it is. And when you say its shiny like a mirror. Does that mean it reflects like a mirror. can you see clear objects in its reflection. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted August 11, 2014 Any mirror chrome vinyl is going to have the "house of mirrors" effect it's not going to reflect a perfect reflection like a mirror..It will be a duller reflection. Spec sheet says 1 year shelf life, 3 year durability... I make decals and ship them.. Never had a complaint.. Share this post Link to post Share on other sites
Willmac1.wm 6 Posted August 11, 2014 Thanks skeeter. I'm going to make a few things for hunting. If you look up "ghost blinds" you will see the affect I'm going for. They make it sound like they are using a special mirror material. So I was looking into it. It basically looks like coroplast and camo graphic on one side and mirror vinyl on the other. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted August 11, 2014 Thanks skeeter. I'm going to make a few things for hunting. If you look up "ghost blinds" you will see the affect I'm going for. They make it sound like they are using a special mirror material. So I was looking into it. It basically looks like coroplast and camo graphic on one side and mirror vinyl on the other. I have my Avery chrome available, as I have to do a job. So I took some photos, I have my hand above the roll and a blue roll of vinyl beside it.. And you can also see my ceiling above. I couldn't get too close to the roll as it showed my reflection in it...LOL 1 Share this post Link to post Share on other sites
Willmac1.wm 6 Posted August 11, 2014 thanks allot. it looks like this will work just fine. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted August 11, 2014 Your welcome.. Hope it works out for you... Share this post Link to post Share on other sites
Dakotagrafx 7,298 Posted August 12, 2014 I have my Avery chrome available, as I have to do a job. So I took some photos, I have my hand above the roll and a blue roll of vinyl beside it.. And you can also see my ceiling above. I couldn't get too close to the roll as it showed my reflection in it...LOL DSCN1967.JPGDSCN1968.JPG hold it . . . you have a reflection? sorry carolyn couldn't resist 1 Share this post Link to post Share on other sites
arty-rc 719 Posted August 12, 2014 Scottty, You're Bad!!!!!! 1 Share this post Link to post Share on other sites