Beardown 0 Posted November 16, 2006 OK so I bought a 25" Plotter/ Cutter Model # MH721. So let me just ask a few questions about this Model. So what pens work with this plotter? Also so I can get some just say 23 " Velum and plot on the vellum and use this for a negitive for screen printing ? I have use a vinyl cutouts for a negitive before Just wondering if it would work using pens? Also what Blades are compatiable? What do you reccommend? Also where do you buy your vinyl ? any Links? Brands? I know ebay but I just think alot of them would be cheapo's I know alot of questions, sorry about that I just want to be prepared. Thanks Beardown Ohh also after you cut your vinyl and peel the (Iforget the term) Excess.....What type of paper do you apply it to? I know that it is sticky on one side, and it gets applied to the non sticky side of the vinyl.. Again sorry for all the questions ...and Thanks for BEARing with me Beardown ! Share this post Link to post Share on other sites
MarcelC 5 Posted November 16, 2006 Hello! I can answer some of your questions. The pen adapter uses regular disposable ink pen refills that you can purchase at most office supply stores. We sell Roland compatible replacement blades and basic vinyl at www.uscutterdirect.com If you are looking for a wider variety of materials and supplies you can try checking at this site. http://www.fellers.com/ Share this post Link to post Share on other sites