welder.man 3 Posted December 6, 2012 Would anyone please be able to trace this cow for me. I would like to be able to cut it from vinyl so 2 or 3 colours would be great. I only need the cow not the background. Thanks Share this post Link to post Share on other sites
dwp99 283 Posted December 6, 2012 That's going to be very hard for me to do. See if you can use this Cow.eps Share this post Link to post Share on other sites
welder.man 3 Posted December 6, 2012 Thanks but no it has to be this cow, I have traced in now and it looks OK, I was hopeful a better vector artist than me might have a go. I cannot get the tail right and it still lacks detail. Share this post Link to post Share on other sites
Neuromax 97 Posted December 6, 2012 I would take a crack at it but it would be much easier if you uploaded your vector file so we wouldn't have to start from scratch. Share this post Link to post Share on other sites
Coaster36 327 Posted December 7, 2012 How much detail are you planing on getting from white vinyl for the tail? The hardest part for customers to understand is that the vinyl is a solid color and even though that tail is white, there is a lot of detail that you dont really notice. I think your best bet would be to change the tail a little and move it away from the legs. Leave a little space between the leg and tail. Share this post Link to post Share on other sites
Robert H. Bigart 64 Posted December 7, 2012 The tail needs to be between the back legs. Bob Share this post Link to post Share on other sites
