cutting fluro with sc cutter

[mxracer394 22]

im trying to cut some oracal fluro. I cant get it to cut all the way thru i havelowered the blade and made no difference..pressure is still on 1g. i dont want to keep trying to adjust it cause that fluro aint cheap...any ideas

[slice&dice 2,450]

Are you saying that this "fluro" (?) material is thicker than regular vinyl?

If so, the pressure would have to be INCREASED to provide more downward force.

[mxracer394 22]

Ten four tbe fluro is 6mil. I figured lowering the blade would work.will try raising pressure tonighy

[vinylmotivations 143]

Same blade as regular vinyl, up the pressure double normal most likely

[Snapper 30]

If you don't want to play with your settings... just select number of passes as two. The cutter will cut it twice going over the same path.

[slice&dice 2,450]

Where in Sign Blazer do you have that option of "two passes" ??

[Coaster36 327]

Signblazer doesnt have that option.

Flexi has it, Id be worried about alignment issues using that option. Although I have never tried it, I dont know how it goes about the process.

[mxracer394 22]

went from 1 to 150 on pressure and it turned out okay.... thanks for the help

[MZ SKEETER 4,709]

Signblazer doesnt have that option.

Flexi has it, Id be worried about alignment issues using that option. Although I have never tried it, I dont know how it goes about the process.

I think it could be done in Signblazer,,,, copy on top of each other.. and it would take a good tracking cutter

[slice&dice 2,450]

went from 1 to 150 on pressure and it turned out okay.... thanks for the help

You're welcome.