tservice 3 Posted June 9, 2012 I have 8.6 and I have a saved file. I need to edit it. But I have to undo the contour cut outline. How do I undo that? thanks Share this post Link to post Share on other sites
Dr12volt1338 116 Posted June 9, 2012 Select the whole image... Effects> Clear or separate at the bottom...... Share this post Link to post Share on other sites
tservice 3 Posted June 9, 2012 under effects I only have 2 options, 1. contour cut. 2. contour cut mark :/ Share this post Link to post Share on other sites
Dr12volt1338 116 Posted June 9, 2012 sorry I didn't see it was starter.... Starter must not allow for this. post the file I will see if it will work with mine..... Share this post Link to post Share on other sites
tservice 3 Posted June 9, 2012 great, thanks. here it is. New folder (3).zip Share this post Link to post Share on other sites
Dr12volt1338 116 Posted June 9, 2012 I cleared the contour and the big box all the way around the whole thing...Let me know if that works Tomato Juice.zip Share this post Link to post Share on other sites
tservice 3 Posted June 9, 2012 that is perfect, thanks so much. idk why SAI did not include a undo for that..... Share this post Link to post Share on other sites
Dr12volt1338 116 Posted June 9, 2012 To make you have to upgrade usually... Was that something you created??? You may have to select the whole image open up your design central go to the tab all the way on the left and click the red "X"... I don't know if that will do it either..... It would seem if you can contour cut with Starter you should be able to undo it..... Share this post Link to post Share on other sites
tservice 3 Posted June 9, 2012 I have never found a way to undo it. I always save before and after. I will contact support and see. thanks againfor your help. Share this post Link to post Share on other sites
mfatty500 454 Posted June 10, 2012 Or maybe convert to outlines and remove the contour. Share this post Link to post Share on other sites