lonestarcountrymusic 3 Posted May 19, 2011 Alright first off im run a Roland GX-24. My problem is on half of the cuts it does on a decal its leaving maybe a mm or 10th of a mm of material. How do i adjust the offset? or is that not the problem? Im running CutStudio and have not found anything in the software that allows for adjusting the offset. Share this post Link to post Share on other sites
lonestarcountrymusic 3 Posted May 24, 2011 no insight? Share this post Link to post Share on other sites
lonestarcountrymusic 3 Posted May 24, 2011 thanks, but unfortunately that has nothing that shows how to adjust the offset. The owners manual says nothing and i cant find anything when i search on yahoo.com Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted May 24, 2011 thanks, but unfortunately that has nothing that shows how to adjust the offset. The owners manual says nothing and i cant find anything when i search on yahoo.com The blade offset info is in your user manual. Go thru the Menu on your control panel. Page 39 of your user manual. http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/GX-24_USE_EN_R4.pdf and here is the CONTROL PANEL FLOW CHART Page 3 Shows Blade offset. http://support.rolanddga.com/docs/Documents/departments/Technical%20Services/Manuals%20and%20Guides/GX-24%20Control%20Panel%20FlowChart.pdf Share this post Link to post Share on other sites
lonestarcountrymusic 3 Posted May 24, 2011 yeah i found the flow chart finally online but i went to sleep shortly after, so i forgot to post i found it lol. Share this post Link to post Share on other sites
lonestarcountrymusic 3 Posted May 27, 2011 still having a problem with having MM pieces staying attached to some of the parts. my offset was adjusted from .25 to .30 and it doesnt seem as if it fixed anything. Share this post Link to post Share on other sites
lonestarcountrymusic 3 Posted May 28, 2011 anyone have some ideas? Share this post Link to post Share on other sites
lonestarcountrymusic 3 Posted May 29, 2011 appearently offset is not going to fix this problem. any other ideas? Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted May 30, 2011 does your cutting software have an overcut feature like flexi? Share this post Link to post Share on other sites
lonestarcountrymusic 3 Posted May 30, 2011 not that i know of. its cutstudio which comes with the roland cutter. Share this post Link to post Share on other sites