DecorativeAppeal 0 Posted April 2, 2011 I'm new at this but I'm trying to cut from SignBlazer to my Laserpoint cutter: In SignBlazer I have an image, click cutter, click setup & can't find COM9 which is the # in device manager (I'm using USB Port). I can't get SignBlazer to cut, any help is appreciated. Thanks! Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted April 2, 2011 I'm new at this but I'm trying to cut from SignBlazer to my Laserpoint cutter: In SignBlazer I have an image, click cutter, click setup & can't find COM9 which is the # in device manager (I'm using USB Port). I can't get SignBlazer to cut, any help is appreciated. Thanks! You will have to change the com port number in device manager, if it doesn't match one in Signblazer http://support.uscutter.com/index.php?/Knowledgebase/Article/View/30/5/establishing-communication Share this post Link to post Share on other sites
Rodger 527 Posted April 2, 2011 I can't remember for sure & you might have to search & read up ( or wait until another member who knows for sure ).. but I think SB requires port 6 or below . If you have serial ports on PC & cutter , save yourself a bunch of trouble & buy a $16 serial cable from Radio Shack . Share this post Link to post Share on other sites
AshComputers 197 Posted April 3, 2011 Or contact me and I'll fix it for you. Email me Share this post Link to post Share on other sites