239 Design 5 Posted October 27, 2010 Hi, I did this for a friend and had some troubles but he liked it and I did it for the cost of 2 roll of cast vinyl. I had a problem with a lot of little air bubbles? I will keep reading and stocking the site and maybe by the next job it will turn out better! I did not do the bottom number it must be the skytrak # please let me know what you would have charged for this installed and any way I could have done it better Thanks Scott[/img] Share this post Link to post Share on other sites
239 Design 5 Posted October 27, 2010 great 2 pics of the same thing!!!Let me try again keep in mind the sky trak letter were done by the company. Share this post Link to post Share on other sites
hawkeyeent 0 Posted October 27, 2010 What size are the graphics and is that the only side lettered, or are both? Also, did you have to do any artwork or were you able to import the image and cut? Share this post Link to post Share on other sites
239 Design 5 Posted October 27, 2010 Hi, the side panel is 23x28 the boom was 15x35 and I did the door on he other side tat was a top pcs. 8x20and under th door handle was about 15x20, as for the tornado I had it vector, I just need to adjust it a bit. I layered them before I got to the job and I think that is how I got the bubbles? Share this post Link to post Share on other sites
rrc1962 0 Posted October 27, 2010 I would be at $225 done in Oracal 651. Share this post Link to post Share on other sites
