benedettij 0 Posted August 2, 2010 Hi I have a MH-720 and work perfect..... but I want an another better cheaper plotter.... I have this doubt between these plotter, and another questions...... - I can buy a Refine GoldCut without stand? - What is the lifetime of MH-720, with ocasinally used (example 2 hours per day) Regards J_Benedetti Share this post Link to post Share on other sites
BannerJohn 1,324 Posted August 2, 2010 I was told that the goldcut is better built and more reliable than the refine. Life of teh refine is anyone's guess. 4 years and going strong in my case. Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted August 3, 2010 I was told that the goldcut is better built and more reliable than the refine. Life of teh refine is anyone's guess. 4 years and going strong in my case. but tthey are both made by Refine? ? Share this post Link to post Share on other sites
BannerJohn 1,324 Posted August 3, 2010 I was told that the goldcut is better built and more reliable than the refine. Life of teh refine is anyone's guess. 4 years and going strong in my case. but tthey are both made by Refine?? yes, but I think the goldcut is made to stricter standards. Share this post Link to post Share on other sites
belfastlad 0 Posted July 21, 2012 HEY GUYS PROB NOT THE RIGHT PLACE BUT WAT CUTTER DO YOU USE IN SIGNBLAZER FOR THE GOLDCUT 48" CUTTER I CANT FIND THE GOLDCUT OR REFINE new to the site and sign making Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted July 21, 2012 The Refine MH series should be there, depending on which version of Signblazer you downloaded or try Redsail Share this post Link to post Share on other sites
belfastlad 0 Posted July 21, 2012 hey thanks for the reply im using signblazer elements ver6 no rfine listed and tryd all the redsail and still wont cut im useing the usb if that helps narrow down wats wrong Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted July 21, 2012 yes get off of the USb and use serial or a keyspan adapter, you will want to any way. work thru here choose MH series http://start.uscutter.com/ 1 Share this post Link to post Share on other sites
belfastlad 0 Posted July 21, 2012 hey guys thanks for the help got it working so another quike question done a test word works fine real nice clean cut so im happy but when i go to cut the word stays in the bottom left corner so it be right were the blade starts how do you move it cuz i hav lots of vinyl with bit missing due to trying to get it working so i left it on the roll rather than have loads of small bit everywere thanks for reading and thanks in advance Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted July 21, 2012 You don't move the word, you move the cutter head and set your origin button there on the vinyl. Then it will cut there Share this post Link to post Share on other sites
belfastlad 0 Posted July 21, 2012 thanks Mz skeeter ye found that out after readin threw ten pages of post lol thanks anyway Share this post Link to post Share on other sites
