This may not be the right forum but......

[crash5050 0]

Is there a secret trick to loading the vinyl?  I have an MH721 and it has 2 rroller bars that the vinyl can hang on, but I have tried every way that I can think of to keep the stock from unrolling all over the floor.  I would think that this is not they way that it should be. 

[stickygrafix 2]

I've never used them to "hang" the vinyl, I just sit the roll on top of the rollers and it never unrolls on me.

[Jerry Bonham 1]

That is correct.

If there are two rollers then the roll of vinyl is placed on top.

Jerry from SignBlazer.

[crash5050 0]

Well, DUH!  There is an old saying, if it were a snake it would have bit me.... Thanks guys.

[Orangejbird 0]

I just got my LaserPoint last Friday and wasn't real happy with the lack of graphics that were in the instructions for setting up the stand and rollers. Nothing showed where the rollers go and the pic of the stand should show the directionality of each piece better and which screws go where. It was a total guessing game to set it up and finally get everything where it needs to be.

Now I find out the roll of material sits on top of the rollers?  Never would have guessed that. Which roller holds the 2 disk shaped "thingys?"

Please take the time to make a more comprehensive assembly manual.  I had to search all over this site to find pics of machines and still I'm not sure I got it right.

I probably missed an online PDF or tutorial. :notsure:

[kenimes 42]

The silver disks can go on either of the material rollers, and are used when you want to put one of the rollers through your roll of vinyl, instead of putting the roll of vinyl on top of the two rollers.

The LaserPoint is so new, that we have not had the chance to update the instructions, and the manufacturer has yet to send us anything for them as well. Should have something to go by in the near future.