vinylcreations1 0 Posted June 20, 2010 I just finish cutting a project but i this also has an outline. Do i set the main part of the project first and then the outline, or do i set the outline and after set the main part of the project. And which is the best way to lay the outline? thanks Share this post Link to post Share on other sites
mabscotthandyman 1,410 Posted June 20, 2010 What software are you using ? Dan Share this post Link to post Share on other sites
vinylcreations1 0 Posted June 20, 2010 What software are you using ? Dan I am using sign blazer. Share this post Link to post Share on other sites
odokie 8 Posted June 20, 2010 Select what you want to outline. chose manipulate, chose expand/outline. try a few options until you get it right. Share this post Link to post Share on other sites
vinylcreations1 0 Posted June 20, 2010 i already know how to do it on sign blazer. but when i cut the project the outline cuts separate from the main part. which is the easiest way to lay them out? Share this post Link to post Share on other sites
odokie 8 Posted June 20, 2010 you want it all to cut at the same time? select all weld, cut Share this post Link to post Share on other sites
mars 45 Posted June 20, 2010 Are you talking about a two color design? If you are doing something like text with an outline in a different color I find it easier to do it in layers. The outline will be a solid piece including the area below where the letters go - then apply the letters on top of the outline. -Mike Share this post Link to post Share on other sites