mod22 0 Posted March 15, 2010 Can I use my cutter to cut pinstripes 1/4'' or 1/2'' wide out of a 15'' roll and if I can how do I go about this. Thanks still learning alot here. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted March 15, 2010 well, that really depends on how good the tracking is on your cutter. You don't state what it is. I have a Graphtec, that does a great job. Make yourself a design, 1/4" x the length 1/2" x the length etc. , I do pinstripes alot not hard at all. Share this post Link to post Share on other sites
mod22 0 Posted March 15, 2010 I have the copam 42 '' hopefully it will work I was just going to use the square and size it the way I need it 1/4 '' by 48 '' hopefully that will work Share this post Link to post Share on other sites
deth502 39 Posted March 15, 2010 im not a math expert, but i just broke out my calculator, and after about 30 min of calculating and deliberation, i have come to a conclusion. yes, a 1/2" pinstripe will fit within a 15" width of vinyl. Share this post Link to post Share on other sites
cutme 5 Posted March 15, 2010 why don't you just buy rols of pinstripe material? it would be much cheaper. bb Share this post Link to post Share on other sites
