pyrophire 0 Posted March 18, 2010 Alright, ill put in my order later tonight. I just ordered 2 cans of frog juice as well, spray type. Share this post Link to post Share on other sites
jhelms 5 Posted March 18, 2010 Used my 1100 out last night 1st time, Got me a new sunie yesterday JPSS, shirt turned out perfect made for our VBS at church they are ordering 50+ shirts LOVE IT!!!! jhelms Share this post Link to post Share on other sites
gatorb8 0 Posted March 18, 2010 Does anyone make a 13" roll of printable vinyl that would work in the 1100? That seems like it would be ideal. Or maybe cut a 24" in half? I'm just starting and thinking it would be great to get a 10 yard roll. Share this post Link to post Share on other sites
tlzimmerman 11 Posted March 18, 2010 Not sure, just in researching I am having problems finding even large rolls of aqueous printable vinyl.....let alone small ones. Looks like I might go the papillo rout and send my big stuff to one of the solvent printers on here. Share this post Link to post Share on other sites
gatorb8 0 Posted March 18, 2010 I ordered some sheets from papilio to try, it's reasonable but a roll would be best. Share this post Link to post Share on other sites
hockeygirl 30 Posted March 18, 2010 You can always order a 24" roll and have them cut in half... Share this post Link to post Share on other sites
pyrophire 0 Posted March 18, 2010 Does anyone make a 13" roll of printable vinyl that would work in the 1100? That seems like it would be ideal. Or maybe cut a 24" in half? I'm just starting and thinking it would be great to get a 10 yard roll. Think about it in the other direction, order a 36 or 42 inch roll an cut them in 12 inch strips, that way you have 12x36 inch pieces to feed through Share this post Link to post Share on other sites
gatorb8 0 Posted March 18, 2010 wouldn't it be less wasteful to use a 12" roll? Use it right off the roll? Share this post Link to post Share on other sites
hockeygirl 30 Posted March 18, 2010 For those who are interested... I talked to SignWarehouse and the Sihl 3988 will work on any waterbased desktop printer. Here's the link: http://www.signwarehouse.com/c-IM-MS-ART-SHL3988.html Although $102 for the 24" sounds a little expensive to me, since I purchased a house-branded roll from my local supplier for under $70. Share this post Link to post Share on other sites
tlzimmerman 11 Posted March 18, 2010 Yeah, the only thing that makes me nervous about that sihl stuff is it says quantity limited at the bottom...as if they aren't going to sell it once out of stock. I like to commit to products I know will be around if at all possible. Share this post Link to post Share on other sites
pyrophire 0 Posted March 18, 2010 Yeah, the only thing that makes me nervous about that sihl stuff is it says quantity limited at the bottom...as if they aren't going to sell it once out of stock. I like to commit to products I know will be around if at all possible. My local distributor sells the SIHL and has alot in stock, they are Reese Supply, they are located in these areas Share this post Link to post Share on other sites
jhelms 5 Posted March 18, 2010 I put in a request in at mactac a few days ago and they called me today my samples going out tomorrow dont know what size yet there is another thread in this forum that says the JT 1958p is the stuff for the 1100 will let you know how it works jhelms Share this post Link to post Share on other sites
tlzimmerman 11 Posted March 18, 2010 I called fellers, they have the IPM 2120 by avery for $1 per square foot, 36" rollsx45 foot for 127.99. Spose to last 4 years with an overlaminate, not too bad. Share this post Link to post Share on other sites
edge 67 Posted March 18, 2010 Does the coating on MacTac to enable printing give the vinyl a matte or gloss finish? Does this type of vinyl offer the same resistance to tearing as other conventional 4 mil vinyls? Share this post Link to post Share on other sites
pyrophire 0 Posted March 18, 2010 I also put in that request with MACtac the day I posted the contact info for mactac rep, anything water base printable needs to be matte or else the ink stays wet and smears, i dont know about the thickness. Share this post Link to post Share on other sites
hockeygirl 30 Posted March 18, 2010 yeah, I use 4 mil matte printable vinyl. It's tear resistent, but it is definitely thick, esp after you add another mil for the overlaminant. But it works in a pinch for small quantity stuff... Share this post Link to post Share on other sites
edge 67 Posted March 18, 2010 I'm currently using ImageStixx for this purpose in sheets and wondering if MacTac is all that different or if perhaps ImageStixx is in reality MacTac cut down and remarketed? Using pigmented ink without any protective layer or coating I've had success with it lasting 12+ mo with moderate UV fade. However the product easily tears upon removal attempt at that point. Share this post Link to post Share on other sites
pyrophire 0 Posted March 26, 2010 Alright I got my Cobra 1100 today, along with the Mactac sample and printed up some stickers for a local band. Sealed them with some frog juice and they are amazing, they are thicker and flexible, they dont tear and I assume are waterproof. I'll take some photos of them tomorrow to show you all. Also my samples of Sihl's stuff is here, but not what I wanted... I'm assuming the mactac stuff is the same as sihl so yea. Share this post Link to post Share on other sites
bizzytop 1 Posted March 28, 2010 Guys, thanks for posting all the good info here, just purchased the cobra Epson 1100 system and went ahead and ordered the Sihl 3988 from sign warehouse. Looking to do Color Vehicle Magnets, since most of the once I do are 12 x 24" I think I can make this work. Had a question about laminate, I have some clear Vinyl that I picked up a while back was wondering if this would work as a laminate, I also have frog juice but think that the clear vinyl would probably last longer your thoughts? Share this post Link to post Share on other sites
boomerbabe 0 Posted March 28, 2010 I've been looking at getting an Epson 1100 to do transfers for shirts, but if I can also do stickers and such all the better. Very interesting thread. Would forum members that are using this system be so kind as to post some pics of what you are doing, what vinyl you use and coating, I would be ever so grateful. Thanks. Share this post Link to post Share on other sites
pyrophire 0 Posted March 28, 2010 I've been looking at getting an Epson 1100 to do transfers for shirts, but if I can also do stickers and such all the better. Very interesting thread. Would forum members that are using this system be so kind as to post some pics of what you are doing, what vinyl you use and coating, I would be ever so grateful. Thanks. I just posted what I did on it with full details on here: http://forum.uscutter.com/index.php/topic,26780.0.html Share this post Link to post Share on other sites
hockeygirl 30 Posted March 28, 2010 Had a question about laminate, I have some clear Vinyl that I picked up a while back was wondering if this would work as a laminate, I also have frog juice but think that the clear vinyl would probably last longer your thoughts? Theoretically, it should work. I haven't tried it since I've always just used overlaminate. Depends on what kind of vinyl it is, I'd look at the thickness and the shrinkage rate before using it. Share this post Link to post Share on other sites
SmallSigns 23 Posted March 29, 2010 I've used the Avery and the Mactac --- both work great for contour cutting decals. Share this post Link to post Share on other sites
jhelms 5 Posted March 29, 2010 Small signs what is the avery model nos. and which doyou prefer avery or mactac jhelms Share this post Link to post Share on other sites
Alien 11 Posted March 29, 2010 Guys, thanks for posting all the good info here, just purchased the cobra Epson 1100 system and went ahead and ordered the Sihl 3988 from sign warehouse. Looking to do Color Vehicle Magnets, since most of the once I do are 12 x 24" I think I can make this work. Had a question about laminate, I have some clear Vinyl that I picked up a while back was wondering if this would work as a laminate, I also have frog juice but think that the clear vinyl would probably last longer your thoughts? If you are gonna use it outside, the laminate needs to be UV or it wont last very long. Share this post Link to post Share on other sites