heavyduty 0 Posted January 21, 2010 Hi all, Iv'e got a job coming up thats a 4x8 blue banner white lettering. the problem is the want the school name faded light light grey. i hoping they make a very thin vinyl to where i can lay the white vinyl onver the top. If anyone has ever done this before i could use some advise. Thanks, Share this post Link to post Share on other sites
Cuttter 1 Posted January 21, 2010 heavy duty, I would out source it to the guy on ebay, I have used him in the past and he has done VERY good work. his prices are very low and you can keep your prices. Schools pay almost anything. http://stores.ebay.com/GreatGiFeidea123?_rdc=1 Share this post Link to post Share on other sites
heavyduty 0 Posted January 21, 2010 i just looked at his ebay store. looks like he only does up to 4 lines. ive got like 10. lots of txt. Share this post Link to post Share on other sites
knucklehead 530 Posted January 24, 2010 How bout some " Etched look" vinyl, like is used on glass? Or a full digital print. Share this post Link to post Share on other sites
Cuttter 1 Posted January 24, 2010 i just looked at his ebay store. looks like he only does up to 4 lines. ive got like 10. lots of txt. Here is what the guy mage for me and he shipped it the same day I ordered it and received it in 2 days. The Banner was alot better, crisp clear than in the image provided. Share this post Link to post Share on other sites
JoeDirt 5 Posted January 24, 2010 here is a crazy way but it works and last! Spray paint http://www.krylon.com/products/fusion_for_plastic/ Cut the letters but don't weed, then fade with the spray paint, let dry and weed. I even taped and installed after an hour of drying. Here is the article that I saw that gave me the idea to try it. http://www.signshop.com/pdf/sbi61_vinyl_91.pdf Share this post Link to post Share on other sites
Cuttter 1 Posted January 25, 2010 here is a crazy way but it works and last! Spray paint http://www.krylon.com/products/fusion_for_plastic/ Cut the letters but don't weed, then fade with the spray paint, let dry and weed. I even taped and installed after an hour of drying. Here is the article that I saw that gave me the idea to try it. http://www.signshop.com/pdf/sbi61_vinyl_91.pdf That's a great idea, I'm gonna have to try that. Share this post Link to post Share on other sites
midwaste 4 Posted January 26, 2010 here is a crazy way but it works and last! Spray paint http://www.krylon.com/products/fusion_for_plastic/ Cut the letters but don't weed, then fade with the spray paint, let dry and weed. I even taped and installed after an hour of drying. Here is the article that I saw that gave me the idea to try it. http://www.signshop.com/pdf/sbi61_vinyl_91.pdf That is awesome. Are you using the krylon with basic 651 or similar vinyl? Share this post Link to post Share on other sites