jigga bites 0 Posted July 6, 2009 Probably a noobish question... but I thought it would be cool to make custom wine or shot glasses with dishwasher-safe vinyl decals. Can this be accomplished? Any advice would be greatly appreciated! Share this post Link to post Share on other sites
Jay2703 704 Posted July 6, 2009 I would give it a try with Oracal 651. If it will hold up to car washes and sitting out in the sun on a 100 degree day I don't see why the dishwasher would take it off. I don't know if I would risk putting it through the dry cycle though. Share this post Link to post Share on other sites
edge 67 Posted July 6, 2009 A dishwasher normally heats the water to a scalding temperature. Good Luck Share this post Link to post Share on other sites
jigga bites 0 Posted July 6, 2009 A dishwasher normally heats the water to a scalding temperature. Good Luck This is what I'm worried about. I'm not sure if applying heat would 'melt' the vinyl to the glass and keep it safe, or if the hot water would just blast it off. (small pieces especially) Hmm... Anyone else have any luck with this? Share this post Link to post Share on other sites
Rodger 527 Posted July 6, 2009 You could always make a decal to add that says " Handwash only " I'm sure the decal would not fair well for very long using a dishwasher . Share this post Link to post Share on other sites
Jay2703 704 Posted July 6, 2009 I'm going to try one tonight. I will let you know how it goes. Share this post Link to post Share on other sites
jigga bites 0 Posted July 6, 2009 I'm going to try one tonight. I will let you know how it goes. Sweet, thanks! Definitely keep me posted! Share this post Link to post Share on other sites
Rodger 527 Posted July 6, 2009 I have read on here that some members have done that & it held up awhile . I guess it depends on how hot the dishwasher heats the water up to . Share this post Link to post Share on other sites
knucklehead 530 Posted July 7, 2009 I don't know about regular vinyl, but I put some SignGold on a liter beer mug, and ran it through 5 washings in a Kenmore Ultrawash machine. Looks just like it did the first go round. (LEGAL DISCLAIMER- Now I'm not advocating anyone should do this, or that it's safe, or it's safe to put signgold on a glass you will be drinking from. All I'm saying is, I ran it through several washings, and it still looks good). I just did it because a lady ask me if it was dishwasher safe? I told her it was only a display piece, but then my curiosity took over. Share this post Link to post Share on other sites
edge 67 Posted July 7, 2009 I don't know about regular vinyl, but I put some SignGold on a liter beer mug, and ran it through 5 washings in a Kenmore Ultrawash machine. Looks just like it did the first go round. (LEGAL DISCLAIMER- Now I'm not advocating anyone should do this, or that it's safe, or it's safe to put signgold on a glass you will be drinking from. All I'm saying is, I ran it through several washings, and it still looks good). I just did it because a lady ask me if it was dishwasher safe? I told her it was only a display piece, but then my curiosity took over. Top or bottom rack? Share this post Link to post Share on other sites
JoeCamaro 11 Posted July 7, 2009 I would think something like that is more a decorative thing than a daily use thing. You can always tell the customers to hand wash them. It wont kill them. Share this post Link to post Share on other sites
knucklehead 530 Posted July 8, 2009 Top rack. Mr. Camaro is correct, it was just a decorative piece, but I remember trying to remove some a while back and that is the most god-awful stuff to try to remove you'll ever run into to. If you ever put signgold on something, it needs to be something that will never want to be changed. Share this post Link to post Share on other sites
sarconastic 29 Posted July 8, 2009 Stadard dishwashers like Whirlpool , Kenmore etc. only heat the water to about 150-160 on a good day, and it all depends on the input water temp. The dry cycle is about the same. I work for a company that is overseen by a government agency and requires us to have dishwashers that heat to a minimum of 160. I called all the other manufacturers and they all said the same thing, " ours 'MIGHT' heat to 160 but we can't guarantee it. I finally found a Bosch unit that does it every time, so we don't get gigged. Temps on a vehicle window can exceed taht by a lot so i think they shold be ok, just have to worry about some of the dishsoaps deteriorating the adhesive maybe. Kevin Share this post Link to post Share on other sites
edge 67 Posted July 10, 2009 I can tell you from experience that Avery A6 applied to a clean whiskey glass and washed in a Kitchenaid on the top rack with Cascade did not fair well. Smaller segments on the project lifted after one washing with no heat dry. The remainder of the project appeared to possess a level of adhesion lower than when first applied. This same type of vinyl has survived 24 months thus far in all weather applied to the back of our vehicle and regularly subjected to high pressure car washes and direct midwestern sun light. Our Kitchenaid is 10 years old and if my recollection is correct from working in the sales and service segment of the appliance industry was designed to preheat the water to 180 Share this post Link to post Share on other sites
Alien 11 Posted July 11, 2009 Older dishwashers get hotter. When the gov ment made mfgs put energy guides on appliances the first thing to go was the higher temps. Drops energy usage quick. Why older dishwashers dry a lot better. I'm in the dishwasher mfg business for 8 more weeks and then they shut the doors and i gotta find something else to do. Share this post Link to post Share on other sites