airtime grafix 0 Posted April 24, 2009 i have the mh871 and when i cut my vynl mask it makes little notches on the edges on some fonts but not all of them !!!speed is at 16 ... thanks for any info!!! Share this post Link to post Share on other sites
Pappy 0 Posted April 24, 2009 you probably need to post something thats not cutting right. A lot of these guys and gals have seen it all. So I'm sure someone can help. Pappy Share this post Link to post Share on other sites
airtime grafix 0 Posted April 26, 2009 well i got it figured out!!! just turned down the speed to 4 cuts reel smooth!! Share this post Link to post Share on other sites
Hippie459MN 6 Posted July 3, 2009 well i got it figured out!!! just turned down the speed to 4 cuts reel smooth!! 4 seems like it would be really slow. My 871 does that also and I am running it at 16 inches/s and pressure of about 80ish I think. Maybe I will have to slow the speed down some more and see what happens. Everything going one way is real smooth line but the other dir seem to all have a slight jagged line. Nothing really major but enough to bother me. I will report back later as I have a few cuts to make later tonight. Share this post Link to post Share on other sites
cpwall 0 Posted July 3, 2009 Try taking off the blade holder and cleaning it up. Vinyl bits can get stuck in the holder and cause the blade not to spin freely and stick in one direction, possibly why it does good one way but not another. Share this post Link to post Share on other sites