gjoe32 0 Posted March 5, 2009 Does anyone know if I can use a usb print server with the laserpoint 24? Share this post Link to post Share on other sites
cutme 5 Posted March 5, 2009 i don't think plotters like wireless networks. but you can give it a try and let the rest of us know. bb Share this post Link to post Share on other sites
bayshorecreations 30 Posted March 5, 2009 I have heard of people doing that with other plotters so I dont see why it wouldnt work with a uscutter. Let us know your results! Share this post Link to post Share on other sites
Dylan 0 Posted March 5, 2009 upgrading the memory in the cutter would likely minimize any issues you might have, as the entire project could be held in the cutter. D Share this post Link to post Share on other sites
gjoe32 0 Posted March 5, 2009 I can't understand what increasing the memory will accomplish in this case. All I want is to have my cutter set up further away than my usb cable can reach, like in another room. Share this post Link to post Share on other sites
jheyne 0 Posted March 11, 2009 if you go with a wireless usb adapter, let me know how it works.... I'd love to put mine in the next room over Share this post Link to post Share on other sites
midwaste 4 Posted March 11, 2009 I can't understand what increasing the memory will accomplish in this case. All I want is to have my cutter set up further away than my usb cable can reach, like in another room. The PC transfers the data to the plotter at a certain baud rate. If you do this wirelessly, you risk losing some data in the transfer, as it is not a direct connection. However, if you increased the memory in the plotter, you could set it to not start plotting until the entire data transfer occurs, providing the memory in the plotter can handle the entirety of the plot data. At least this is how it works with printers. Share this post Link to post Share on other sites
jheyne 0 Posted March 12, 2009 is there a slot for extra memory in the laserpoint? I haven't been too eager to pull mine apart yet considering that I just bought it a few weeks ago Share this post Link to post Share on other sites
lueman 19 Posted May 17, 2009 This may be a little late, but A print server's drivers are set to connect to an LPT port not a COM port Share this post Link to post Share on other sites