wasatchcars 0 Posted February 21, 2009 I was just thinking that I might be able to apply vinyl to a screen material like in our windows and use it for a stencil for spray paint? has anyone ever tried this? Share this post Link to post Share on other sites
briansdesigns 0 Posted February 21, 2009 i imagine it would work on like say a silk screen Share this post Link to post Share on other sites
Rodger 527 Posted February 22, 2009 I have not seen it , but I have read about stencil material in this forum . You would not have the screen in the painted areas to deal with then or have to cut it out . Share this post Link to post Share on other sites
midwaste 4 Posted February 22, 2009 Yeah, there would be no reason for the screen, and you would have to throw it away as it would be clogged with paint unless you cleaned it quickly. I have seen several articles where people use vinyl for paint mask on motorcycle tanks, pinstriping, etc. Share this post Link to post Share on other sites
Team Satan 1 Posted February 22, 2009 What your looking for to use is called "spray mask", that's what its know as here in OZ. Cut it as you would with normal vinyl, apply app tape, stick it on your surface to be painted, remove app tape, spray and remove the mask! cheers Share this post Link to post Share on other sites
knucklehead 530 Posted February 22, 2009 Yep, paint/spray mask, most all suppliers sell it. You just reverse weed it, apply it, paint and peel off the mask. Share this post Link to post Share on other sites
wasatchcars 0 Posted February 22, 2009 I was thinking more of a multi use stencil for company's to mark there equipment Share this post Link to post Share on other sites
Rodger 527 Posted February 22, 2009 Those stencils work & seems I have read about stencil material ( non adhesive ) that a cutter would cut . I have made those a long time ago for my backhoes , eqipment etc . It winds up looking like shipping crates with overspray . As cheap as vinyl is & as many people who have cutters , I would not use the old fashioned stencils unless it was on stuff that looks was not ANY consideration at all . When I get a Mobile Home that is headed for the scrap yard , I take a rattle can & spray down the side free-hand ( which I am not good at ) just to advertise " Mobile Home Disposal & my phone # " . I would rather have a hard stencil I could reuse, because that would look ALOT better than what I am doing . I have gotten calls from the free-hand painted signs . I think there is a vinyl that comes off easy that is used as stencils Share this post Link to post Share on other sites
midwaste 4 Posted February 24, 2009 I would cut out a stencil from Amberlith or Rubylith film, or possibly even just transparency material, and then attach it to a wooden frame. If you get this stretched well, it should work well and last awhile. Share this post Link to post Share on other sites
Alien 11 Posted February 24, 2009 Oracal 811 Stencil film. Just saw it today in my Oracal Sample Pack Share this post Link to post Share on other sites
Fbomb 0 Posted February 24, 2009 I've done graffiti art with stencils like this. The only problem with the screen idea is that the paint will work on the adhesive, so you can loose some of your detail parts inside...I use card stock to cut stencils, works PDG! Share this post Link to post Share on other sites
Budsoda 3 Posted February 24, 2009 I just use 20 mil magnetic material.. cut it with my plotter..and it works good for a stencil and last a long time to.. Share this post Link to post Share on other sites
Rodger 527 Posted February 24, 2009 The magnetic vinyl seems the best idea . But as cheap as vinyl is , I would think unless it is a surface the vinyl would not stick to , vinyl would be better than paint Share this post Link to post Share on other sites
juniorranger 0 Posted March 2, 2009 Same as what i did, I bought the thinest magnet material my supplier had and then turned the force all the way up and cut the lettering out on my copam, that way i had a reusable self adhesive (being magnetic) stencil, sold a bunch to the Holt Catapillar dealership by my house.. They logo all their equipment for rental and number them, and everytime they get a piece back they do a little refurbishing (spray touch up paint) So they are always buying different stencils. Works great, unless you have like a letter "o" and you just have to keep up with the center piece.. Share this post Link to post Share on other sites