deviated 0 Posted January 31, 2009 so I just cut my visa and mastercard logos, and while I did them by weeding and eye, I wanted to put the dots and be able to use the clear transfer paper to lay the two color logos. I put (2) dots on the two left hand corners and they did not cut out? So my question is in SB how do I make my marked for my 2 or more color process and have them line up. thanks Share this post Link to post Share on other sites
Jay2703 704 Posted January 31, 2009 I will make my registration marks a different color from everything else. When I cut out my different layers I will select the color I want to cut and hold the ctrl key down and also select the registration mark color to cut. Do this sfor each color of your design. Share this post Link to post Share on other sites
deviated 0 Posted February 2, 2009 what are your reg. markes? just any o I pic and put to cut? Share this post Link to post Share on other sites
C Lewis 6 Posted February 2, 2009 I make two squares.... Share this post Link to post Share on other sites
deviated 0 Posted February 5, 2009 what the ctrl about function about? Share this post Link to post Share on other sites
Cre8tiveCutter 7 Posted February 5, 2009 hold down the control key and it will allow you to select multiple items. Renee Share this post Link to post Share on other sites
deviated 0 Posted February 14, 2009 Thanks for the help!!! Everyone is great!!! Share this post Link to post Share on other sites
