Search the Community
Showing results for tags 'problem'.
Found 27 results
-
The cutter is about 1 month old purchased from USCutter. The cutter has been cutting vinyl about 3 hours per day 7 days per week since purcahse, settings are 120 force, 20 speed. The last week or so the cutter has been running 6 hours per day and this is where the problem occurs. After about 4 or 5 hours of cutting the suction fan turns off while cutting is in progress and the machine takes a 3-4 second brake and then continues cutting after the fan starts up again. This happens every 2 or so minutes and gets progressivly worse. Reseting the machine does not help and the problem only goes away when the machine is left off for the night, turning the machine off for 1 or 2 hours helps a little but does not get rid of the problem. I have a Copam that has been cutting 6 hours a day for 6 months straight and hasnt had problems so Im supprised the Roland is having an issue. The Roland is much faster at 20 speed than the copam is on 60 speed so the Roland is working harder and cutting much more. I just need to know if this is normal from memory getting filled up or some kind of machine software problem vs a physical problem. I can't have the Roland break down on me unexpectadly. Any one experience this or have any suggestions?
-
I have three videos thanks mb20music who turned me on to Jing with plans to make others. It is a way for me to pay forward for all the help I have received on this forum. No certain order but special thanks to Skeeter, Rodger,Jay2703,Mr300s,Racer88,2ctmediallc, mb20music and many others. I have only been doing this since Dec 2011 and without the help I have received there is no way I could have figured it out. So if you have a problem there are many talented people on here that are willing to help you learn. Thanks everyone. That being said here is a few recommendations 1. Read your plotter manual thoroughly 2. Read your design cutting software manual thoroughly 3. Search this forum with keywords 4. If this fails post your problem in the right category, some one will help you. Here is my videos up till now. Fill with SignBlazer: http://screencast.com/t/cOdG5YHZLd Fill in Inkscape: http://screencast.com/t/XQbLzoMm Trace in Inkscape: http://screencast.com/t/AXBvFaI2t Another example: Part one: http://screencast.com/t/PBKyw6HkL7d Part two: http://screencast.com/t/5RNW2eRbqva