-
Content Count
500 -
Joined
-
Last visited
-
Days Won
3
Posts posted by signyouup
-
-
Yellow and "What?" make Red!
- 1
-
-
Never done it but sounds like a blade killer to me
- 1
-
Omron is who makes the timer.
-
I think a little more space between graphics and the edge of the window on the top and bottom..
-
The only time anyone beats Mark to the punch is when he's not near a computer!
- 4
-
Nice Torch!
-
3 hours ago, Soren said:Do you have the original photos that you can post instead of photos of the photos?
or get a good scan of the photos at a high resolution.
-
Is there a Baudrate setting?
-
That's all I can remember "PETA" standing for. Nice job!
-
Does the SC require a null modem cable?
-
Do the tiling in the design software so you can break it into 2 separate jobs.
-
I mix rubbing alcohol(91%) and water 50/50 and add a few drops of baby shampoo to a spray bottle.
- 1
-
Vinyl removal = $80/hr because I don't want to do it.
- 2
-
I with it looks crooked crowd.
-
I think the pinch roller issue was on one of the bigger ones.
- 1
-
The thing about blueprints is there are usually multiple line widths.
- 1
-
For cutting the Mylar on your machine you could try using multiple passes on the cuts.
- 1
-
1. Are the grit roller setscrews tight?
2. Are you pulling the vinyl off the roll before cutting?
-
Who's is a contraction of "who is"
Whose denotes possession.
- 1
-
Here's my 10 minute try but it's going to take a lot of cleanup. Here's a link to what I did to the image plus a little Gaussian blur.
-
If the tracking is in question, will the stripes be the same width at each end?
-
It might only be available in certain versions.
-
Nice!
Cutting Problems using Vinylmaster with Foison C24
in VinylMaster CUT, LTR, PRO & DSR
Posted
Have you set your origin(zero) on the cutter?