MJRKat
Members-
Content Count
21 -
Joined
-
Last visited
Never
Community Reputation
0 NeutralAbout MJRKat
-
Rank
Member
- Birthday 05/25/1980
Profile Information
-
Gender
Male
-
Location
Binghamton, NY
-
Cutter Just goes ALL THE WAY LEFT!!!!
MJRKat replied to James605's topic in USCutter Refine Cutting Plotter Support Requests
I have had the same problem before....It seems to happen when there is alot of Humidity......I just turn it off, and back on again, and it usually works...I also have mine in a room with a carpet, and since I put some pieces of lenolium(Spell?) down where I have to step that has helped too.....Got rid of some of the static...... -
Cuts across graphic randomly
MJRKat replied to smoovlatino's topic in USCutter Refine Cutting Plotter Support Requests
Other than the "line of Death", I am very pleased with the MH721! It has more than payed for itself, and I really haven't done that many jobs....Glad I went this route....Can't beat the support you get on this site also.... -
Cuts across graphic randomly
MJRKat replied to smoovlatino's topic in USCutter Refine Cutting Plotter Support Requests
ok, here's what I got.....I got the adapter, couldn't get to work with computer, picked up a Belkin 9 pin to USB.....Fired it up, and I had to cut 16' of vinyl, made it about 8', and it put a line all the way back through what had been cut.....Now I had the enable safe long cuts on, but I think I was using it wrong...It would get done transferring the data for that amount of inches(72), but the cutter wasn't done cutting. I hit the ok button and sent the info on anyways....I think it was sending to much at once, also I had the Baud rate at 9600. I changed the safe cutting length to 48", and also waited until it was done cutting that amount before I hit the OK button.....I changed the Baud to 4800 on both computer, and cutter....Cut out that 16', plus a whole lot more, and haven't had any problems with it cutting across the graphic, it goes back to the side of the vinyl, then down the side when going back to origin.....If anyone is having these problems, I hope this helps some... -
Cuts across graphic randomly
MJRKat replied to smoovlatino's topic in USCutter Refine Cutting Plotter Support Requests
Ok...Thanks guys, I got an adapter coming, 5 to 7 business days, I'll let you know..... -
Cuts across graphic randomly
MJRKat replied to smoovlatino's topic in USCutter Refine Cutting Plotter Support Requests
ok thanks ken....I'll have to see if I can pick one up tomorrow....Would not having it in A/C be part of the problem? -
Cuts across graphic randomly
MJRKat replied to smoovlatino's topic in USCutter Refine Cutting Plotter Support Requests
Don't think I can....Got a Inspiron 9400 notebook, and the cords sent with cutter won't work on it......I am trying to find some now online for it, but no luck yet -
Cuts across graphic randomly
MJRKat replied to smoovlatino's topic in USCutter Refine Cutting Plotter Support Requests
I just had the same problem with my cutter with larger, more complex graphics....I changed the baud rate on both to 4800, and made sure the cutter was grounded to the stand, and the problem got better, the cut across wasn't quite as bad, I tried slowing the baud rate down to 2400, I'll keep ya posted....Well that didn't work either.....Kinda does sound like a Memory thing...Also I am using the USB..... -
Thanks guys.....Sorry haven't been on in awhile....Yup got it figured out now!
-
Thanks Terry.....I'm looking for the ones for a 340 Duster to be more specific......I see they have a little hump in the back.....
-
Anyone know where to get some from??? Thanks Matt
-
Here's #2 job, my dad's IMCA modified............ Dads_i_1.eps Dads_i_1.eps
-
Thanks Fivestar.........
-
All the tips that these guys give on here really save you alot of money in vinyl, but there is some tips that you just have to figure out for yourself too, there are just so many different things to pick up, so many techniques..I have PhotoImpact 4.2, and there isn't half as many things on that as there is in Corel X3(which I just got)....It took me 2 weeks just to figure out how to get 3 layers the way I wanted them with text....So far though, I love every minute of it! lol