MZ SKEETER

Members
 View Profile  See their activity

  • Content Count

    17,527

  • Joined

  • Last visited

  • Days Won

    498

Posts posted by MZ SKEETER

  6. Posted

    Here is the latest Flexi driver pack,, but I don't know how to help you with such an older version of Flexi..   Have you considered updating your version to current.   Or  possibly just buying a copy of  Flexistarter,   just to cut with,, Flexistarter is all I use. and I have 30" Graphtec. works great for cutting.   You should still be able to  design in Flexi pro  and import,  Or just download the FREE Signblazer ,  it is compatible with the Pcut.. You can find the downloads in the Signblazer thread  at the very top.  

    http://support.uscutter.com/index.php?_m=downloads&_a=viewdownload&downloaditemid=44&nav=0,4

  8. Posted

    is this the instructions that you found?

    Found on this thread  info left by Levi 

    http://forum.uscutter.com/index.php/topic,25735.0.html

    In order to swap the carriage arm on this unit you must follow the steps below.

    1) Remove the face plate from the carriage.

    2) Loosen the hex screw at the top of the shaft that is connected to the carriage arm.

    3) Loosening the two screws that are at the end of the springs on the top of the carriage. This will allow you to pull the carriage off of the track.

    4) Remove the carriage arm and replace it with the new one.

    Best of luck. Give us a call at 888-298-8143 if you continue to have problems.

  10. Posted

    i got it off best brands of the world site, it's supposed to be vector. everything shows up but the oldsmobile symbol on the cut screen.

    to upload a picture, design etc,  at the left of the reply box is ADDITIONAL Options,  upload it there, 

  12. Posted

    on your Signblazer cutter set up screen  below BLADE offset,  is  CUTTING SIZE CORRECTION  in a white box. ,  click it.  You will get a box that says OUT PUT size correction,, when you have your design entered on the screen and the size you want.  the out put measured sizes should match the expected size you want.  If not, then change so it does.  I hope that is the problem. 

  21. Posted

    glad to hear you had a great experience,  Your question about Signblazer,  the company is no longer in business, So it will always be a trial version.  You can actually download Signblazer right from the  top of the Signblazer thread. Dark blue lettering

  24. Posted

    my Graphtec is the same way.  See if there is a screw in the back that they are using as a stopper for the pinch roller,  I keep a screw driver on top my machine just for that. I can loosen the screw and it is in a little piece of metal that slides either way in a slot/track. So I can bring both pinch rollers right together to do little 2- 3"  wide pieces.

  25. Posted

    I have sooooo many pieces of scrap pieces of all sizes, it is unbelievable.  because my projects are usually large, My vinyl comes in boxes that are 24" x 7" x 7" ??   and  30"  x 7"  x 7"   ?  I cut the panel out of one side of the box.  I roll my scraps up and stand in the box, I write  on the backing length and color..  I roll the vinyl on inside to keep dust off.  When needed, just reroll the opposite way, let sit for about 10 minutes will lay flat again.