MZ SKEETER
-
Content Count
17,530 -
Joined
-
Last visited
-
Days Won
498
Posts posted by MZ SKEETER
-
-
-
sorry, I am a Graphtec owner, I have never used a Refine. There are Pros and Cons all over the forum on them. maybe someone else will jump in, the Copam is highly regarded as a good machine. For $749.00 and a 2 year warranty on the USCutter.com site.
-
looks like just another company that sells Refine cutters. Refine is the brand and US CUTTER doesn't make them, just sells them.
-
I plan on shipping (2) 22''X100'' vehicle body graphics. Would these shipping tubes from the post office mess up the vinyl?
Thanks!
your question was already answered in the other post just like Bigfoot said. If you don't believe, someone, try it, after all the tubes are free. it is your customer, and how you want to present your graphics to your customers. .
-
Signblazer, just doesn't have the drivers for those models, Signblazer has not been updated for awhile, as the owner passed away a while back. This is why it is Free trial software. purchase a Flexistarter.8.6 or Signcut and get away from Signblazer.. Cost $99.00 you can use inkscape.org as your FREE design software.
-
absolutely gorgeous!!!! as always... You do such great work Schramm
-
transfer tape is on top. to transfer the decal to apply it. You have alot of reading and homework to do.
you can also go to a search engine like www.dogpile.com, or ASKjeeves.com and enter how do you make a decal.
-
yes it does, decals are in 3 layers before being applied, backing, decal, transfer tape on top. here is a video showing how to apply a decal
-
transfer tape , exacto knife, tweezers, designs, table, work area, I use needles, you can use inkscape.org for free design software,
-
that is the way Cutting Master 2(Flexi version) is for the Graphtec,it is not design software either, just cut, but it has plugins for Illustratar and Corel.
-
can be done both ways,
here is a cutter/printer/ but definately get your check book out, this is an inexpensive one.
http://www.uscutter.com/Roland-VersaCAMM-SPi-Series-4-color-PrinterCutter-_p_570.ht
-
I think there is an Illustrator plugin for it, most all of the Flexi versions made for such as, Graphtec Cutting Master /Roland Cut Studio have the Illustrator plug in as well as Corel,
-
Thanks for getting that for me Carolyn I was at the NBM show at indy
not a problem, hope you had a great time... and you probably came real close to my town, coming and going.. at least not real far away..
-
R series Of Vinyl Express is made my Redsail. The Q series is made by Graphtec. which would work with your Flexi7.6 (Graphtec)
Also Flexistarter8.6 would work for both for $99 on EBAY.
-
you cannot OPEN in Signblazer, you must import. Are you dong that?
-
sounds like it still has bitmap in it (raster) did you move the vector over and delete the original image before you saved it as an .eps?
-
I think you could go into USCutter support section. and download the Flexi drivers to your Flexi output. It has instructions how to do it in the utility. Give that a shot. May work, may not.
http://support.uscutter.com/index.php?_m=downloads&_a=viewdownload&downloaditemid=44&nav=0,4
-
-
possibly try a USB to serial adapter.. just a thought
-
Flexistarter was not contour cutting version until version 8.6
contour version is Flexistarter8.6 /with contour cutting, there is also Flexistarter 8.6/ without contour cutting.
no contour cutting
http://cgi.ebay.com/FlexiStarter-8-6-vinyl-cutter-FlexiSign-Flexi-Sign-NEW-/270588382156?
cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item3f00530bcc
with contour cutting
-
right under it. where it says curve quality, put it on medium,
-
Augh - well that was fast...back again. I was able to cut one full decal without a problem. Now, trying to cut the same decal and it has stopped in the middle both times...any ideas?
Did you do what I reccomended above? change the packet size,? turn the cutter on and off between cuts?
-
Ok a litlle advice, make sure you see it run. make him cut a detailed design for you. Alot of things are in excellant shape and still don't work. my 2c. and Hello, from Indiana
-
ok,,, so lets answer that question here: the answer for Oracal 24" x10 ft is 651 vinyl intermediate vinyl.
ORACAL 651 24" by 10 Yard Starter Pack -12 Colors
The ORACAL 651 24" x 10yd Starter Pack contains 12 of the most popular colors in the ORACAL 651 line.
ORACAL 651 vinyl is an intermediate calendared vinyl with an outdoor life-span of 5-6 years.
You get 1 roll each of:
010-White
021-Yellow
031-Red
049-King Blue
051-Gentian Blue
053-Light Blue
056-Ice Blue
060-Dark Green
061-Green
070-Black
071-Grey
312-Burgundy
ORACAL Color Guide
Font Help Please.
in Fonts
Posted
I knew you wanted to get that order done..
:) LOL