-
Content Count
17,529 -
Joined
-
Last visited
-
Days Won
498
Posts posted by MZ SKEETER
-
-
-
Your welcome, You could try a different cutter in Signblazer. Like set it up as a different model, and see if that works.
also in your background settings PRIORITY SETTING on your cutter, try it on Command.
-
sorry, I don't use Signblazer. I use Flexistarter, Maybe someone can help you with the Signblazer.
-
Since I posted the last message that I use iclipart, I have gotten over a dozen requests for me to download cliparts for different members. I am respectfully asking everyone to please not do that. It puts me in a bad situation as it is against the terms of use for me to transfer any content electronically and I feel bad having to tell people no. If you see the value in their service, please get a subscription, it's not expensive.
don't blame you one bit on that one...
-
On Signblazer you need to be on Hp-GL. see if that works.
your welcome
-
When you are running on Signblazer,software. , what command mode do you have your cutter running on? GP-GL or HP-GL?
and Cutting Master on what command mode?
-
I was hoping he was already had that checked, since he has a Pcut,,
If you don't know where advance after plot is in Cutting Master,
upper left corner of Cut/plot screen >
below properties, is 4 pictures>
farthest to the right is a picture of a blade>
click it> at the top is advance after plot,
hope that works for you.
-
do you mean cut another design before you cut off the previous order from the cutter?, just run back to back orders? Please explain more.
what cutting software are you using?
-
this is what a Novajet 750 looks like which is a discontinued model. A Novajet 750 is a 42" machine, you haven't stated how large this one is. even rebranded, it does not look like the same machine.
http://www.encad.com/Printers/Discontinued/NovaJet-750/index.asp
I could not find anything for the Times printer,, only that Times printer is a very large printing company in China. but does not make printers. Just provides printing service. Sorry, all I found.
Hopefully someone else can help you out,. I just did searches on the internet..I couldn't even find a picture of the control panel. But it did say the Novajet 750 had 8 buttons 4 on each side. of the screen. Encad even merged with another company and no longer produced Encad after early 2006.
-
isn't there a plate on it somewhere, that has more info for the model etc. maybe under it or back?
-
If you already have a cutter, why not just purchase Flexistarter8.6 with contour cutting for your current machine. See if it's compatible for your machine. Unless you really want a different cutter. Big Savings Some on the forum are using them with their Pcuts, now. and others. User Boosted like it real well with this PCUT.
-
No, these cutters do not print, you can take the blade out and put the ink pen back in it's place. That is what a plotter does. Like blueprints. It can draw the design with the inkpen. Some people use it in place of vinyl on paper to make sure the design is good instead of wasting vinyl. Or if having problems cutting, to use the ink pen instead. Any cutter will work. Like anything you get what you pay for, If you can afford it.. Go with a Copam on up. The lower end machines do the job, You just have to spend more time fine tuning them. Copam on up to the Graphtecs, Rolands are more quality precise machines, with a whole lot less aggrevation. Alot of people purchase the lower end machines, make some money and move up to the higher end machines. It's all a matter of how much you want to spend.
but if you really want a printer/cutter, here ya go..
-
I do send them their proofs in jpeg format.
your above statement said you are saving it as an .eps to your pictures. Guess that confused me.
-
have you tried uninstalling /reinstalling Signblazer? and why would you send your customer an .eps file for a proof? and not a jpeg? I don't use Signblazer, but have it downloaded to help people, I just made a design, File> EXPORT as jpeg. to my pictures. worked fine,.
Import is to bring something INTO Signblazer. You need to EXPORT it out of Signblazer.
-
So what was the name of the company that made these and went out of businesss? What company name is on these DVDs?
please post pictures of the DVDS, and the sets , etc.
-
really nice Bill, hope you had a great time back in NY
-
I found you some info here.... The Driver is the same as a King Rabbit vinyl cutter, driver is on this website. I would suggest getting Flexistarter or something else. Flexistarter is cheaper on EBAY. Rather than Artcut.. Unless you can get the cutter going with Signblazer. Inkscape.org is a free design software that can be use with Flexistarter. Goodluck.
http://www.mbkpinternational.com/artcut_sd1360_cutting_plotter.htm
-
Your welcome, goodluck
-
sorry, had to look that one up... never heard of it.. you could try different drivers in Signblazer, Roland PNC1000 is a generic driver that is used in alot of vinyl cutters. Or try one of the Uscutter drivers like the REFINE MH series. and see if that gets you anywhere. Don't you have support for Artcut? Or the cutter?
-
Flexi Help
in Flexi
I use Flexistarter, but at the top of the layout screen is HELP, Help topics. which tells you how to do things in Flexi.
-
I just imported it into Flexistarter. looks fine, Strange looking Poppy lol a circle with leaves and a stalk, what vinyl cutter are you using?
-
post the image, at the left of the reply box is Additional options. you can post it there.
any chance you can just dump the Artcut and use another program? Signblazer is FREE and can be downloaded right here on the forum. Alot of people have trouble with Artcut.
-
most people use Oracal 631 as it is removable, without taking off the paint, but you have to be careful on type of paints applied to. Teflon paint, it does not stick to with good results. Just peels off. That is from reading other posts only. I have never used it. But I'm sure you can do searches on the forum for it.
http://www.uscutter.com/ORACAL-631-Exhibition-Calendered_c_524.html
-
lol you will find that impatience will get you overwhelmed and very frustated. We see it on here all the time, new people promising orders, and can't even run a vinyl cutter,, don't have a clue how to set it up, and can't even vectorize an image. What vinyl do I use,? How do you apply transfer tape? what kind of tape? What does blade offset mean.? Then they get ticked off at us, because we won't do their job for them. Good Luck with that impatience. You need to learn first, then practice, practice, practice, before you take any orders, Even friends. my 2c
looking to buy a lazer point cutter
in Buy, Sell, and Trade
Posted
Laser pointer for sale in Nashville In.
http://indianapolis.craigslist.org/for/1955889666.html
You might want to mention where you are located.