MZ SKEETER

your welcome and welcome to the forum

they do not have to arc,,, can use straight stripe here are videos on how to apply... http://www.youtube.com/watch?v=2r_oCiafDdQ

hope that gets printed and not weeded OMG

a quick little bit of advice,, NEVER mention in a complaint that you will leave negative feedback,, Matter of fact, never mention feedback in any emails when you have a complaint with a seller. , You cannot threaten a seller for any reason. . EBAY, has a policy that you CANNOT mention negative feedback to get what you want. This is right from the EBAY site.. " This member attempted to apply feedback extortion for unreasonable demands." This statement is a legitimate complaint that a seller can file against a buyer, all they have to do is copy and paste your message into the complaint box. Although you have a gripe, you still have to follow Ebay policy or you can find YOURSELF in a jam.... and suspended yourself.

I applaud you for whatever works for you...

is it GRK1 ALBERT CHISELED? go to http://www.fontpool.com/fonts/fontry/greek_font_set_1.html

did you try a different driver? You know it is not yourcutting. software, as you got the same problem with both software....

possibly try a different driver,, as you know it is not the software.

I'm not partically joyful about the way that works myself, as I think it wastes too much vinyl, but what are ya going to do?? What ya going to do? Go into background settings and disable it... I never use it, just one of those frills that I just don't use.

what is Flexi doing when you try to install it... it is very ez to install.. there are different areas on the disc that need installed, the Flexi and the drivers.

MUNCH....MUNCH...MUNCH that avitar is soooooooooo funny

that is exactly what I would think it would do from just looking at it.. there is nothing to hold the tape, or the applicator, I have used MASK RITE from the very beginning and would be lost without it... there is no adjusting of anything for different rolls. I have a 24" and a 30" it is a little pricer, but works great. can purchase from SIGNSUPPLY.com on EBAY

go into the thread for inkscape in forum. great info there, and even a video. http://forum.uscutter.com/index.php/topic,13275.0.html

well make sure you leave feedback in EBAY, so other customers don't get screwed, I was looking at the feedback, obviously they are showing a gloss vinyl in their ads, but it is really matte colors with no shine.. Saw where several people stated that..

when you post, at lower left corner it says additional options, then you can upload, pics etc, graphtec does not print, but you could probably purchase a printer that prints on vinyl, and then contour cut your decals.

vectormagic.com

inkscape.com free software,, ya gotta learn it sometime....

flexi pro 8.6 I have flexi starter, but would love flexi Pro all Flexi are very user friendly

I found some info on another Sign forum, They have a category for Vinyl Master Pro, you will have to sign up with their forum to read though, just take a minute maybe some help there.. or can ask there... http://www.signforums.com/forums/index.php?showforum=40

I don't have this cutter, but from reading other threads, the blade is supposed to be in the back holder. pen in front holder. don't you have some kind of tutorial with your software? Like maybe at the top of the screen it says HELP? most all do..

yes, it has plenty of vinyl pre pulled. also the carriage head is firm on the track, blade depth is set correct. i am using Signblazer but also downloaded Signcut x2 and both programs do this. messing with the offset didnt help either as shown in that second pic. the cutting strip is flat tool LOL then I would say put in a support ticket and and get some REAL help,, I'm fresh out of ideas...

Yep did that, I can go like 4 feet straight and yet when it cuts it goes to hell. I even played with the pressure of the blade so it barley cut and get the same results. Think I will use this as a boat anchor and go buy a real machine. go with a Graphtec, I have one (30" ) never any problems in over a year... great tracking...

are you pulling the vinyl away from the roll, so that it is not tugging on it? is the carriage head firmly on the track,? make sure only a a bit of blade should be sticking out.. what cutting software are you using?.. start at 0 degree offset and work out at 5 degree make sure cutting strip is down flat on the machine, all the way across.

yes, as long as you have the drivers installed and software installed and the cutter is turned on, you should find it in device manager

Signblazer Elements is a trial that lasts forever, and yes, you can cut with it.. This is alot of peoples main cutting signware.