Dakotagrafx

or even better cut a paint mask and paint the graphic on with auto paint then clear coat

There are several on here, I know fivestar does great work personally

Welcome from Michigan Oracal 651 for windows and Oracal 751/951 for doors

very nice work!

Teflon sheets same place

Sunie brand new 249 http://www.sunie.com/store/sunie_viewItem.asp?idProduct=3440 with free shipping!

now thats a win win

Very nice :thumbsup:

welcome from Michigan

maybe the bold type implies some kind of authority in your post also . . .not quite yelling but also going for the extra attention. Just my 2c

submit a support ticket. one thing they will have your check is to remove the bottom and make sure all the cables are attached to the motherboard correctly. someone recently had one that had a cable come loose in shipping

quick search found this link and others http://forum.uscutter.com/index.php/topic,15401.0.html

2 things, make sure the carriage is sitting in the track and make sure your blade holder is all the way seated in the back hole if there are 2 holes

great place to start http://forum.uscutter.com/index.php/topic,17489.0.html

sounds like a scam site to me

Wow - read the poor English on their site and from Indonesia what is the shipping and what support do they offer? Scares me

Welcome from Michigan

It's well out of my comfort zone but if you decide to go transfer for the school info try these guys' they did a great job for me on some plastisol trasfers http://www.imagemill.net/index.html

well said A&P

The cost involved is in preparing each screen for 1000 players - that is a lot of screens to be coated, burned cleaned etc that is why each name would run 20.00 by screening them all. Most people screen the school info on the front and do transfer vinyl for the names and Numbers. there are number kits for screening but 1000 changes tracking size and cleaning the screens between is not something most people would do for the price. If you didn't want to do the screen pressing yourself on the school logo get transfers made for under 3.00 in plastisol (same ink as most screen printer use - along with an additive) and add the name and number in vinyl for an additional cost of 2.50 in material plus shirt is FAR mor cost effective than spending 20 setup fee for each name number then add printing cost. You are looking at maybe $5-6 per shirt (Without shirt) as opposed to $25-30 per shirt (without shirt) With the plastisol transfers you can order however many you need and use a heat press to put them on shirt and use the same heat press to do the transfer vinyl. Without shirts you are looking at 5,000-6,000 for customizing the shirts as opposed to 25,000 to 30,000. Not too many schools I can think of can afford that type of expense. That 20,000 buys a lot of needed equipment for the sports

midwaste - at 20.00 that would be 20,000 not ,2000 and you are very reasonable!

with a 1000+ names this is a school with deep pockets if they have screens burned with all names their are number kits not sure if anyone has "name" kits on the other hand if they are lookng to spend 40000 it might be a good time for you to invest in DTG!

I'm guessing just the set up fee on the names would be 35.00 each without the work

Have someone with Autocad convert it for you??? found this free trial that might work for you http://nct.digitalriver.com/fulfill/0096.003

any supplier around here would cost to much to ship so sounds like Glanz is a good option