Dakotagrafx

same here - not exposing the easyweed to the higher temp!

Brandon and Levi both on in the same day - what's up??

Now that's one I hadn't thought of!

Great Deal Neron!

unique and cool

here ya go adidas_2010_FIFA_WORLD_CUP_Font.eps adidas_2010_FIFA_WORLD_CUP_Font.eps

Welcome aboard. Most any cuttter will do what you want - the cheaper cutters just take more set up to get a clean cut. first really good cutter I got was a copam and the graphtec is worlds better than that, but with that said the p-cut and mh series refine paid for the others to upgrade

Remember the CE1000 is the older version of the CE3000 which is the older model of the ce3000 . . . . . the 3000's are anywhere from 3 to 8yrs old and if buying a 3000 only the mk2 has contour cutting Being a graphtec though it should be good

Remember you can rotate the graphic to cut it - so if you do a side graphic will it be more than 24" tall?

Have you tried a support ticket so you can get help from USC?

usually if the customer buys the material total cost would only be 10 percent less. Have people try that with t-shirts. with me purchasing the shirts I control the quality of shirt and if I mess up I get another one with no problem.

By the way Welcome from Michigan

really before uscutter and a couple of others found the chinese low end cutters to get the price down for the common person, the choice was to buy a 2000 cutter and get you education from the supplier. now pro machines have dropped to under 1300.00 and the ones like you purchased are extremely reasonable but you do have so sacrifice a few things for 1000.00 savings - like getting one on one instruction at the regional vendor. This forum provides a great knowledge base and lots of helpful users. Paco has created a great instructional NEW bie manual under instructional contributions that is invaluable for new users. If you have problems submit a support ticket under us cutters main web site and their support staff will help get you going. This forum is a user forum and technically not part of the support system (Officially)

I looked at all mine and don't find it

Thanks Mark

You don't have to do the donation - it just will give you a few nag screens that you have to go thru to start it but it is a full working version in trial form

If you are talking about directly from signblazer they are out fo business - if you are speaking of from the member here that has the posted link you must return the email as directed for an automated return with the info

installation alone would be most of what you got paid

Seems cheap to me

Try reading this - it has helped hundreds of people http://forum.uscutter.com/index.php/topic,17489.0.html If that doesn't work then try http://support.uscutter.com/index.php?_m=tickets&_a=submit

when I had mine I just turned the cutter on first and signblazer found the cutter automatically - power both down, power on the copam, then power on the computer and start signblazer and see if that works - I should ad that I did this with a pc

Are you exporting it as an eps file?

nice job

I used one with the usb cable and signblazer without a problem - probably wrong port. If you can't get it put in a ticket for help in the morning http://support.uscutter.com/index.php?_m=tickets&_a=submit

I love it Bill - What a ride!