mr300s
-
Content Count
3,279 -
Joined
-
Last visited
-
Days Won
48
Posts posted by mr300s
-
-
also take a look at it in wire frame a lot of times you can find problems that way ...
-
Your offset is way off too. That's why you are getting the curls in the corners of your letters.And if thats the case the offset on the Graphtec is 0.00
-
One last thing look at it in wire frame mode and make sure it not cutting the vinyl twice ....
-
2
-
-
Look inside the blade holder after you take the blade out and I think you will find some small pieces of vinyl in there. Use a magnifying glass if you have to and add a drop of oil. Remember that the blade also has to be free to spin, and as Scott said way to much blade, if anything start with as little as you can where you can just barley see the blade.
The same glass look at the tip and make sure you didn't bust the tip. You have a great machine and no way should it be cutting like that ...
-
1
-
-
Did you try the copy and paste to see if it would work for future projects?
-
Just try copy and paste that should work
-
In Corel on the left tool bar you will see out line tool try that, then you will have to play with the nodes a little
-
1
-
-
Maybe have some one like Scott ( Dakotagrafx ) give you a price on printed ones. Then all the dealership has to do is peel and stick. They don't need to know you are sourcing them out ...
-
1
-
-
Great work
-
welcome
-
welcome aboard
-
Welcome from Florida
-
Welcome and have fun with your new cutter
-
The momma cat found her way back. I wouldn't have thought it.very cool to hear keep up the great work you are doing ...
-
it sound like it could also be a wire going to the platen. Try taking the cover off or lifting it high enough where you can move the insulation and see if a wire either burnt or dis connected.
USCutter says the warranty is void if I do not have the original box, which I do not.I think this is the mind set of 99% of today's companies is to try and think of every way to get out of fixing the problem rather then make the customer happy by standing behind their product ...
-
1
-
-
Very Nice
-
welcome from Fl
-
1
-
-
Welcome
-
Guess you didn't like the answers on the other forum??
-
3
-
-
Such a large margin I think I could do better with a pair of scissors
-
I love when folks from the signware join forces with us thank you !!
I remember when Jerry (God rest his soul) started and invented Sign Blazer and was always on here helping everyone with small problems ...
-
-
maybe Johnson I had them make some custome iphone inserts in plastic
-
1
-
-
Welcome
Welcome our new Moderators
in Community Rules & Announcements
Posted
LOL Thanks everyone