-
Content Count
3,279 -
Joined
-
Last visited
-
Days Won
48
Content Type
Profiles
Forums
Gallery
Everything posted by mr300s
-
Would make a good Sticky I see this come up more and more, folks asking how much the cost is. Here is the Company ACP that I deal with. They are awesome folks to deal with and the best part five minutes from my house..
-
A good friend of mine Richard from Cobra Inks put this video together on how to install a color profile. I know this question is asked a lot. Here are all the answers. Unlike other companies Richard supplies support to everyone even if you don't buy from him. That's the way customer service should be... https://cobraink.com/Color%20Control/profiles.htm
-
Is bigger better LOL If I need a 5.5 inch screen I might as well carry a mini ipad in my pocket ....
-
LOL Thanks everyone
-
Problem cutting file
mr300s replied to AmericanWarriorDecals's topic in TITAN 2 Series Vinyl Cutter Discussions
also take a look at it in wire frame a lot of times you can find problems that way ... -
IS THIS CAUSED FROM A DULL BLADE?
mr300s replied to The Elvis Legacy's topic in GraphTec Cutting Plotter Discussion
And if thats the case the offset on the Graphtec is 0.00 -
IS THIS CAUSED FROM A DULL BLADE?
mr300s replied to The Elvis Legacy's topic in GraphTec Cutting Plotter Discussion
One last thing look at it in wire frame mode and make sure it not cutting the vinyl twice .... -
IS THIS CAUSED FROM A DULL BLADE?
mr300s replied to The Elvis Legacy's topic in GraphTec Cutting Plotter Discussion
Look inside the blade holder after you take the blade out and I think you will find some small pieces of vinyl in there. Use a magnifying glass if you have to and add a drop of oil. Remember that the blade also has to be free to spin, and as Scott said way to much blade, if anything start with as little as you can where you can just barley see the blade. The same glass look at the tip and make sure you didn't bust the tip. You have a great machine and no way should it be cutting like that ... -
Did you try the copy and paste to see if it would work for future projects?
-
Just try copy and paste that should work
-
In Corel on the left tool bar you will see out line tool try that, then you will have to play with the nodes a little
-
What do you price dealer tags for?
mr300s replied to Tks_Designz's topic in Business Practices, Sales and Pricing, etc.
Maybe have some one like Scott ( Dakotagrafx ) give you a price on printed ones. Then all the dealership has to do is peel and stick. They don't need to know you are sourcing them out ... -
Great work
-
welcome aboard
-
A very close friend of mine died suddenly while on duty @ 57. Made a wooden box for his wife and a lot of dog tags ... Box images were all I had to work with ...
-
Welcome from Florida
-
Welcome and have fun with your new cutter
-
very cool to hear keep up the great work you are doing ...
-
16x20 Perfect Press Auto Open - Not Heating Up
mr300s replied to iamtherookie's topic in Clamshell Heat Press Discussion or Support
it sound like it could also be a wire going to the platen. Try taking the cover off or lifting it high enough where you can move the insulation and see if a wire either burnt or dis connected. I think this is the mind set of 99% of today's companies is to try and think of every way to get out of fixing the problem rather then make the customer happy by standing behind their product ... -
welcome from Fl
-
How cheap is too cheap?
mr300s replied to byteme6960's topic in Business Practices, Sales and Pricing, etc.
Guess you didn't like the answers on the other forum?? -
Such a large margin I think I could do better with a pair of scissors