-
Content Count
1,038 -
Joined
-
Last visited
-
Days Won
74
Content Type
Profiles
Forums
Gallery
Everything posted by bikemike
-
#2. Check to see if the carage is set right on the rollers. Then send pics.
-
this help at all? BIKER ISIS.eps
-
The up and down arrow is distance from the circle. - is inside, + is outside. The right arrow is position on the circle. That circle is 10 inch. Hope that helps
-
This is corel, but most should be the same. Dont know if the eps will help or not. CURVED TEXT.eps
-
What font. I can give you the lettering inside the 10 inch circle?
-
Merry Christmas to everyone on here. Hope all is well from now right into the new year for each and every one of you.
-
What am I missing here? you have 7 cutters running on 7 computers. I get that part. Not cheap even for the cheap cutters. You will not pay for software, but it has to have everything you want. I am lost on this part. I don't get it. Please explain.
-
I was asked if I could do some HTV on socks. They want around 100 pair. So, I looked for a good price. Looked on ebay, and found some strange stuff. Used (mens and womans) USED socks. Found one pair she wants $50 for a pair! Is there some sort of fetish I have not heard of???????? Not kidding, check it out!!!!!!
-
Looks like it was vectored from a raster. IMO
-
Tell it to ignore it and continue.
-
There is room for all of the worlds animals. Right beside the mashed potatoes.
-
Try to post a pic of what it actually cut so we can compare. From what you have said, I am thinking offset or over-cut.
-
What does a silhouette have to do with an SC? Am I missing something here?
-
You can not cut a raster file. I wish we could. It has to be a vector file. As in just lines,or curves. no graphics.
-
That can't be real. I cant get the upgrade for anywhere near that.
-
Canada, remember that part. Thanksgiving is over and Christmas is coming. What are your ideas? I am going to make this one for my 4 year old daughter.
-
Less HTV the Canadian way.
-
Suggestions required for cutting pin stripes and thin strips on vinyl cutter
bikemike replied to kainth.c.s's topic in General Help
May be the same width at the ends, (maybe) but I don't think they would be the same over the entire length. -
Headache from day 1
bikemike replied to GraphxNMore's topic in TITAN 2 Series Vinyl Cutter Discussions
Good call. I would look at that for sure. -
I call them "oops" forgetting to mirror HTV, or forgetting to switch it back for other stuff is a !@#$%^&*()_+!!!!!! BEER BREAK!!!!!!!!
-
Suggestions required for cutting pin stripes and thin strips on vinyl cutter
bikemike replied to kainth.c.s's topic in General Help
Oh heck ya! unroll what you need. 1> knocks the tracking way off. 2> sends the roll flying across the floor (good luck getting all the dust off it) 3> will trash the plastic gears in your cutter feed. 4> makes you cut what you just tried to cut again. (after you fix #2) -
This is the strangest job I have been asked to do. Story is... This guy bought a brand new 1956 corvette in 1957. Still owns it, but due to his condition, the government decided to take his drivers licence away. He uses a walker now and wanted this put on his walker. Not the nexus, the bottom rail. I didn't charge him.
-
Tiny cuts sticking to blade
bikemike replied to vickwithpc's topic in TITAN 2 Series Vinyl Cutter Discussions
1/8 letters? No wonder you are getting stuff in the holder. You need a printer. How big is the hole in an R or maybe the holes in a B? Asking a lot if you ask me. Oil ain't going to fix that problem. -
That was a sweat find!
-
drop your spacing down to .1 instead if .5. you may still get 6 per row. bleed as you and VM are calling it.