slmann

grabbed it, thanks for sharing.

thanks for sharing

looks great

looks nice

thanks, and the shirts look great

is that vinyl or a transfer?

like those

looks good

own a website and have thought about doing t-shirts for the members. I have purchased some from a local shop for my moderation staff but it seems a little pricey to pay someone else. I have been thinking of getting a heat press and doing them myself. If read a lot in this forum and seen some good info but wanted to ask anyway. I have a pcut and can cut vinyl but not sure if I want to go that route or find somewhere to get my logos done in sublimation. Point me in the right direction. and thanks in advance for your help.

gotcha thanks.

appreciate all the help, anyway you could post a pic and show a finished product of each. any way to do heat transfer and have just the image/logo be the only thing left behind.

is it better to go with sublimation transfers or the plastisol, or both depending on type of shirt. Do the transfers just transfer the image area or is there a block/background left around the image?

was looking at some of the stuff on pro world transfers and now I have another question. They have a lot of stuff on there and some of it is branded stuff and logos. Can you actually make shirts and sell them with those transfers and not get in trouble? Noticed some Ford, GM, etc. transfers on there.

the two logos I have to do are both two color, that's one reason I haven't jumped on the vinyl already. Would there be any places that I could pay to print my design and have the transfers shipped to me? Something that wouldn't break the bank. Are there any other options that would let me print on different types of fabric, such as cotton

thanks, grabbed them both

grabbed it thanks

grabbed a few, thanks to everyone that was willing to share

both those suggestions work. Thanks for the help

Got a question about centering some text in a image. I've attached the project for everyone to look at. It's an oval with a two F's mirrored back to back. It's pretty close to being center but it's about an 1/16 of an inch off. Is there anyway to have signblazer automatically center in the middle of the image or is it just trial and error until you get it right. Thanks in advance for any help. ftflogo3.SBD

here it is cut. http://www.fordtruckfanatics.com/gallery/data/745/medium/IMAG0064.jpg

that was easy, thanks. still trying to figure out how I can select each part and weld. Thanks to both of you for the help.

made my first two layer text and had a little problem so now I have a question. On the background there is two parts that got cut but should be part of the solid background. I'm new to this so I may have did something wrong but I can't tell how this got there. Here are some pics blazed layer test.SBD

I'm still in the figuring out mode and seem to be stumbling over my own feet most of the time. I can view the wire frame and see where the problem is but can't seem to figure out how to get the weld to work. also with the registration marks, I can only get it to let me select one layer/color to cut when in the cut screen. Is there something that needs to be changed to allow more than one layer/color to be selected. Sorry for all the trouble, trying to get this figured out. The manual helps a little but not much.

appreciate the help and I will try your suggestions. had some problems with the registration marks too? I couldn't find the reg. mark tool in signblazer so I just drew a couple rectangles and then changed the color of them to relate to the color I was cutting at the time. You're correct on the bottom mark, that was me just over thinking it. seems like there are a few things missing from signblazer, the trial mode counter is a little aggravating too.

it had me frustrated for a bit, just needed to step back and get a fresh perspective on it.