Can-Am 1 Posted February 11, 2010 Ok im stumped, been a long day. How do we get SB to contour cut and what settings work best Thanks Dave Share this post Link to post Share on other sites
SmallSigns 23 Posted February 11, 2010 You must be using the correct version of SBE -- I'm using 6.0.21 which has the Cut A Print option. You also need a cutter such as the LaserPoint. Once you have all that go to http://forum.uscutter.com/index.php/topic,3222.0.html and follow the instructions. Do lots of practice with the pen before trying to cut. I worked on it for a while and finally got it working great. Share this post Link to post Share on other sites
Rodger 527 Posted February 11, 2010 I have meant to ask Jay about this . I have not had any reason to cut contour yet , but it seems if you make an outline with a offset ... that would do the same thing . Share this post Link to post Share on other sites
Jay2703 704 Posted February 12, 2010 I have meant to ask Jay about this . I have not had any reason to cut contour yet , but it seems if you make an outline with a offset ... that would do the same thing . Roger, SignBlazer requires the cut mask and print a cut to orient and scale the printed image. My machine doesn't contour cut so I haven't used the feature. I have played around with doing it manually like you mentioned above. It is very hard to do it that way. Share this post Link to post Share on other sites