maxcat128

3M has a transparent black on their sample card, but it just seems like a dark smoke job. Regular black would provide a greater contrast.

3M Translucent 3630 is an excellent film and comes in 65 colors from solids thru frosts. 3730 is designed for LED backlight

Check out t-shirtforums.com

US Cutter shipped a refurbished Roland GX - 24, when my client paid for a new unit. No other problems so far!

Is this what You had in mind? If you want it as a Vector, I would have to email it to you--Strokes or Fill or both??

'looks kind of "Old West"-- searched da font. com, but no match Thanks for any help. THANKS ALL- LOOKS RIGHT U NAILED IT

I have a small piece of cut, colored transfer heat material that I would like to try out on a tee shirt- I don't have a clamshell heat press yet, but do have a Teflon pressing cloth and a hot hand iron. Think this might work??

Roof Materials Banner (not mine) It lets passing contractors know this product is available here while waiting in their trucks at the intersection. It is probably freebee provided by the mfr.

It is mounted on the inside of the fence in a warehouse district to keep vandals from tagging and stealing it, I imagine. If it were (changed to hot pink) like the topless espresso drive- thru stand sign further down the road it would probably be more noticeable or sure.

Here's one without the noise. Massage me if you still want this as a Vector file

Illustrator Layering Effects .

Thanks all..

'Saw this at the Vets office today- The colors are extremely clear and bright . The weave of the shirt is not showing through the transfer. I have too many other things going to even think about investing in printing and pressing equipment, but I do have some brightly colored and fine gradient Illustrator vector designs that need to be worn, and if soft enough, several of the local quilt stores have expressed interest. What type of transfer is it and who does this excellent printing and transfer work? I don't think it is screen printing as there is a slight "edge". Thanks,

Yes please, new link would be helpful

Thanks all - Have all I need for now

Sorry, Don't understand.

Thanks- I think it will work my cutter real hard, but I'll cut out a small part of it and give it a try.

I have only used one brand of cutter for the past 2 years - A Roland GX-24 with Cut Studio Software (included free) plug in for Illustrator 5-6, so I can't compare it to other brands, but, I will say, "I have never had a lock-up problem part way through the job, no matter how large, no static electricity problems, or it never failed to cut any way except as instructed by a Illustrator file." It once ran the material off the pinch rollers on a long 18 foot X 23" job, but that was my fault for not getting the material lined-up properly. With a super sharp Clean Cut 60 degree blade, the cutting depth is extended considerably, However, a little more $ for all. hope this helps.

I notice that the Graphtec Robo - Pro is no longer available from US Cutter.. Could there be a problem???

or Hobby Lobby ( Crickut)

?

'cant see it!

You got it exactly right harleytuner - The client wanted just the matte black look, then realized that it couldn't be seen well.

"Donated Work for Non-Profit:" 1.) 84" Wide Matte Black Vinyl Lettering placed on the outside of a store front window. Inside > Outline was mask with Oracal 810 Auto Mask and Spray'd with rattlelcan Krylon "Metalic Nickel. 2. 30' Wide on Door (same procedure) 3.) 120" Wide - My first Back Lilt Sign (same Matte Black on White Polycarbonate)

Nice Art! I learned from U Tube and practiced placement on a glass coffee table with a light underneath.