MZ SKEETER

the laser point is the same machine as the Pcut, it just has the laser on it.

contact Signcut,, on their website. that is the only place you will get the real info.

trying to help a friend.. who has a Graphtec CE50000 2009 unit, How do you disable the media sensor on your unit? I have FC7000mk2-75 and they have different buttons and etc. for how to use the machine. I'm sure someone out there with a CE5000 newer 2009 unit can help him out. Maybe I am calling it the wrong name, BUT I disable the MEDIA SENSOR on MY unit, to stop the machine from doing the premeasure of the WIDTH of the piece of vinyl in the machine, before cutting, then tells you what the cut area is. Is it called MEDIA SENSOR on the CE5000 series also? thanks in advance..

not a problem, if you are going to do a lot shipping, I purchase my boxes from www.uline.com they have most any size.

you can roll it vinyl out

have your tried just uninstalling SignBlazer and doing a fresh install? the link is in the Signblazer thread. Sorry, I don't use SignBlazer, or invest in a more stable software.

I only use USPS, with delivery confirmation, no insurance, UNLESS very expensive say $100 or more, I do not use tubes, I use boxes, and roll loosely,

just call tech support

what driver are you using ? also did you try to do as XP mode?

put in a support ticket and they can remote you can get it figured out

they say it does. I don't have it. mine doesn't have the counting screen I think it is the full loaded cutter version, in the Sign blazer thread

are matching the Flexi to the correct com port on your computer?

you can get it cuttable by vectorizing it in www.inkscape.org plenty of info and videos in the inkscape thread,

don't have it, but does this help you any? http://www.grafx-design.com/03corel.html

doesn't it come with an instruction book or Help at the top of the screen?

well SignBlazer is free and you can download it right here on the forum... You can probably find a driver that may work. also LXI is a version Of Flexi made for Signwarehouse.... You can purchase a copy of Flexistarter8.6 for $99.00 FREE ship on EBAY.

GREAT!!!!!!!!! thanks to all for the help....

have you tried a different software? Signcut has a copy that you can use for a 7 day trial.

thanks, I didn't see that one,, I will pass that along..

yes I showed him that before, he does not understand the part that says Model 7550,, it is explained further up. Does yours say Model 7550?

OK, MY friend said when he Pushes on the ORIGIN and ENTER BUTTON at the same time, it does Nothing. Does this work for you?, then you can Use up and down arrows and scroll for these functions?

sorry that is not it.. EXAMPLE< When a 15" width piece of vinyl is put into the cutter, the machine does a premeasure, of moving the carriage head from the right side of the vinyl to the the left side of the vinyl, and gives a cutting area of 13" So actually it is loosing 2 inches of vinyl. We want to disable that and it appears to be the HOME SENSOR in the use manual, So, are any of you using that and how did you disable it?

ok now here is the User manual,, and on page 5-3 at the END ....Special functions enabling/disabling HOME SENSOR Does this stop your machine from measuring the width of the vinyl in your machine? And how did you get there? http://www.sc-x2.com/files/man/graphtec/CE5000E.pdf

If you have Signblazer, it is listed in the drivers of the Full Cutter version, at lower right of set up page for cutter is a button that says LOAD click it, All the machines are listed.

bump