Leaderboard

The old timers here, are here to help. We do not know every program out there. we use what we use. Combined, we do know every program for design and cutting. In my opinion, grab a beer and click on help is a fantastic idea. There is more in that click than you can get waiting for help from the forum. In my humble opinion.

comments should be about the problem - not personality conflicts. if it continues the thread will be locked Dirt fisherman - keep in mind the people on here helping volunteer their time (many for several years) when it appears someone is not even trying to find answers themselves they do get frustrated and someone with 19 years of experience they might be expecting them to have a solid knowledge of basic functions - - Most of these people read EVERY post on here trying to help - so long winded replies calling everyone condescending puts people in a defensive mode instead of a helpful mode - lets keep the questions and answers condensed without getting personal.

Angie I saw that machine on CL and wondered if they got it sold. I am the mod mentioned and actually here in your area and run a newer Summa. That machine is pretty old but as long as it's been taken care of should be a good option especially at what you paid for it. I recommend trying out the free Signblazer if you're on a super tight budget and don't already have design skills. I run a mac and so use SignCut Pro in combination with Adobe Illustrator but both of those are paid programs.

try going into the vinyl spooler section of vinylmaster and the second tab has an area to adjust offset - mine isn't clicked as a graphtec always uses 0 but other plotters typically people start at .25 and move it up or down in small increments until they get a sharp corner on their test cut from the plotter screen We usually don't get the opportunity to help someone that has been doing vinyl cutting for 24 years - they are usually the ones doing the teaching