greenmachine 52 Posted October 29, 2008 I'm not sure where to put this, but here goes; I'm looking for plans to build a storage rack for 24 inch vinyl rolls, preferrably made out of wood so it could be modified easily. If no plans, how about pictures of what you folks use. Thanks for any help greenie Share this post Link to post Share on other sites
haumana 1,220 Posted October 29, 2008 wall mount or vertical on the floor? Share this post Link to post Share on other sites
greenmachine 52 Posted October 29, 2008 I would prefer floor mount. i had bought the wall hanging one ready made. I just don't like it. greenie Share this post Link to post Share on other sites
JoeDirt 5 Posted October 29, 2008 cardboard box at least 18" High works great J/k Share this post Link to post Share on other sites
haumana 1,220 Posted October 29, 2008 cardboard box at least 18" High works great J/k Same here. It's either in a cardboard box, or I keep it on the plastic end pieces that I got in the original vinyl boxes (and then I cover them with the clear plastic bags). Share this post Link to post Share on other sites
SmokinZMan 2 Posted October 29, 2008 I took different sizes of PVC pipes and cut them to about 10" and used "l" brackets to mount them to a large square of MDF and the put 4 casters on and it works good. The next one I am going to build a lip aroung the MDF and just pour epoxy up to the lip to hold all the PVC in place. I'll post up some pics when I get a chance.... Bryan Share this post Link to post Share on other sites