HOW TO DO THIS?

[2001kx 0]

just wondering how to do something like this

i tried to start with a letter

put an out line around it

lay this over top of the oval

and what i want to do is remove the outline from the letter so that it has a blank space cut out of the oval around the letter.

understand? lol

but it would be similar to the logo i posted above.

is this possible or does it have to be drawn this way?

[JohnnyTremendous. 0]

Your idea sounds like it would work.  Give it a shot and see how you like the results.

[2001kx 0]

i tried but it didnt work...deleted the whole middle piece?

im prob missing a small detail somewhere?

[JoeDirt 5]

try separating the outline from the letter and then cut out from the oval and the outline.

[2001kx 0]

try separating the outline from the letter and then cut out from the oval and the outline.

Do i have to manually cut the parts out?

i thought i could use weld or something but weld adds on not removes

[Guest Terry]

No idea what you want but here is a Flexi outline of it.

Untitled.eps

Untitled.eps

[2001kx 0]

No idea what you want but here is a Flexi outline of it.

the design means nothing to me...it is just an example of what im trying to do.

just trying to figure out the effect i want.

[2001kx 0]

here is an .eps file with an oval and an r

try to duplicate the effect shown in the pic in this post(above)

it doesnt have to look good i just need to know how you do it..

design help.eps

design help.eps

[2001kx 0]

ok i think i got it.

i just have to do it in corel draw

i needed a TRIM button that i dont have in flexi

[JoeDirt 5]

under the tab effect there is a combine option then cut out try that.

[Jack Beck 2]

to do this in Flexi.

I would place the "R" over the oval.

select just the R..now go to effects outline...outline the R.

Now select the R and the out line ...goto effects.. seperate outline.

select  the outline and the oval  Than got to effects ...combine..cut out

This should give the effect your looking for.

Jack