d3c3pti0n5 1 Posted September 17, 2008 Here is something else I made fooling around with my cutter. While we are on this topic, does anyone know where to find glow-in-the-dark vinyl? OR - does anyone have a link to small sheets of reflective or fluorescent vinly? By the foot even. I'm just using oracal 651 (white). I've shot these about 50 time each over 300fps and the vinyl seems to be holding up. Share this post Link to post Share on other sites
ff-extreme 6 Posted September 17, 2008 FDC makes a glow in the dark, you can find it at http://www.signsupply.com/Vinyl/Vinyl_Vending_Machine.asp dont remember if its listed but if you call they have it not cheap! Share this post Link to post Share on other sites
Jay2703 704 Posted September 17, 2008 Here is something else I made fooling around with my cutter. While we are on this topic, does anyone know where to find glow-in-the-dark vinyl? OR - does anyone have a link to small sheets of reflective or fluorescent vinly? By the foot even. I'm just using oracal 651 (white). I've shot these about 50 time each over 300fps and the vinyl seems to be holding up. Oracal has a link for requesting samples. I received about 20 8-1/2 x 11 sheets of different colors and types. Might be good for doing your arrows. There was both flourescent and reflective included. Share this post Link to post Share on other sites
d3c3pti0n5 1 Posted September 17, 2008 Awesome...Thanks guys! Share this post Link to post Share on other sites
lowone 3 Posted September 17, 2008 Nice. Very original idea. Share this post Link to post Share on other sites
BlackMesa 0 Posted September 19, 2008 I was asked about this the other day and was totally blindsided. I was into archery for awhile and never heard of arrow wraps and I went looking and couldn't find much information until now. What's the deal with the wraps anyway and does anyone have a template???? Share this post Link to post Share on other sites
FatDad 2 Posted September 19, 2008 specialty graphics sells it by the foot http://www.specialty-graphics.com/index.asp?PageAction=VIEWPRODGROUP&ID=13 Share this post Link to post Share on other sites
d3c3pti0n5 1 Posted September 19, 2008 No need for a template, just draw a rectangle that measures 1x7. This is for a carbon arrow. Some of the fatter carbon arrows you may have to go with 1.25 x 7 or 5 inches if you preferr. The are very easy to install. I use a mouse pad to lay the vinyl on and you wouldn't believe how well the static helps when you lay it on the pad. There are a few youtube videos that show this application. Share this post Link to post Share on other sites
Guest Terry Posted September 20, 2008 Blazer vanes.........Hey is that a Great pyrenees ? Share this post Link to post Share on other sites