ff-extreme 6 Posted August 22, 2008 I setup this file and when I go to cut it the yellow star is not filled in and the pink font same problem, when i look at it in flexi it looks right. im sure its something simple im missing. first image is what it should look like and the second image is the flexi file. reach for the stars logo 2.eps reach for the stars logo 2.eps Share this post Link to post Share on other sites
Guest fivestar Posted August 22, 2008 I ungrouped it and it was fine then. Share this post Link to post Share on other sites
nonabelle 5 Posted August 22, 2008 so should u ungroup before cutting i flexi? Share this post Link to post Share on other sites
Guest fivestar Posted August 22, 2008 No, I don't know why that one couldn't be seen until I ungrouped it. I actually just ungrouped it and checked and it looked fine then. I don't have a cutter here, but once ungrouped it looks like it should of cut fine. Share this post Link to post Share on other sites
nonabelle 5 Posted August 22, 2008 well we're gonna find out. hehe when some of my vinyl comes in for these designs. Share this post Link to post Share on other sites
ff-extreme 6 Posted August 23, 2008 I finished the eps file but im having a problem cutting it. the quick silver font is nasty! the small hash marks inside each letter dont seem to be cutting right to weed and some of it pulls up when i cut it. I know the pulling can be adjusted by pressure but they dont seem to complete the cut. can someone try and cut this and let me know if you can weed it. Thanks Kevin reach for the stars 1 color.eps reach for the stars 1 color.eps Share this post Link to post Share on other sites
mortalimmortal 7 Posted August 23, 2008 Cutting at 600 and pressure 65 on my gx -24 with perma gloss it did not cut good at all. The girl was like acting like it was jagged. The star cut super fast and good. The arch letter went to total poo. The bottom cut fast and fine. Looking at the nodes at the girl it was really bad. The text looked good as well as the star. Not sure why its cutting like it did. I'm sure if I slowed the plotter down to 300 it would have cut fine, but not going to wait that long to see if it will. Share this post Link to post Share on other sites