Wildgoose 4,194 Posted February 16, 2022 I was online ordering some HTV and needed to replenish my sign vinyl in black. I noticed that USCutter is carrying some of the RapidAir Technology variant and decided to give it a go. I don't have a job for this yet but black stuff comes along fairly often. I will return and do a product evaluation as soon as I get a job for this. 2 Share this post Link to post Share on other sites
Wildgoose 4,194 Posted December 31, 2022 I finally got around to using some of the RA variant. Here are my results: #1. I grabbed the roll without looking and used it to cut some very small elements for my son-in-law. The vinyl has an interesting grid/crosshatch built into it that may or may not disappear with time. I think it has some relation to the adhesive that has the same pattern and allows air to get out from under when installing. For small work I would not recommend the RA. We got it done but it was a sketchy thing trying to keep small elements in place while weeding. #2. I used some of this as a cover layer on some Dibond signboard. It worked great and I could definitely see a difference from what you would ordinarily see if you messed up with the squeegee and created a bubble. So I would say for regular sized jobs and large coverage areas this is a good product with benefits from the air release adhesive. It's still a thin cast product requiring transfer tape (I tried without like wrap vinyl) and will stretch if unsupported, so don't skip this step if using it for solid cover. Share this post Link to post Share on other sites
