Jurian501 0 Posted August 16, 2018 Hello Newbie here, I got myself an Creation PCUT CT630 cutter second handed but the bloody thing won't cut Followed the newbie manual but still no luck. PCut CT630 is using Firmare V4.115 Connected with USB and installed the FTDI drivers Checked the COM Settings still no luck Using Singblazer on a Windows 7 Pro x86 OS Searched the web and people are saying that you need to check the baud rate settings on the cutter, Bad news don't have that option, if i select mode it gives me the following options: Cutspeed » Test » Repeat » Press » X » Y » XY with the 0000 behind it Anybode have a idee for this cutter before it learns to fly? Kind regards Jurian Share this post Link to post Share on other sites
Dakotagrafx 7,297 Posted August 16, 2018 are you trying to cut a vector image? what errors are you getting? Share this post Link to post Share on other sites
Wildgoose 4,200 Posted August 20, 2018 Set it on the test option and push the button twice and I think it will cut a test box. Been several years since I had mine so I can't remember exactly. That should give you an indicator that the cutter actually works. Your baud rate settings will be in the cutting software and should be 9600. I don't know my way around Signblazer so can't help you on that end. If you continue to get stuck try the free trial of SignCut Pro and they have free live tech support and you can at least get the cutter running and then decide what you want to do from that point. Share this post Link to post Share on other sites