Pcrat 65 Posted January 3, 2015 I have the WF-7520 Epson I printed out a picture of a black chevy truck, the image had pretty much all the colors in it. printed out perfect, next picture 3 minutes later, printed ok but with lines through it, so i did a head cleaning. ( all colors even black ) Now the nozzle check comes out like u see in the picture, Ive done 5 head cleans so far, the black is getting better, the blue gets good, then back to only a few dots , I also keep getting cartridge error on different ones at different times, all the hoses are full its pulling ink from the tanks fine. just all the sudden happened. any suggestions, i dont know how many head cleanings i can do, I print about a few times ever couple weeks been busy with work and kids lately so. never ran into this before. Thanks Share this post Link to post Share on other sites
Pcrat 65 Posted January 3, 2015 EDIT, 7th head clean fixed it! holy crap! 1 Share this post Link to post Share on other sites
jfronk 3 Posted January 3, 2015 You might try the Inkproducts web sight and look for their head cleaning solvent. I use it for my Epsom 1400. You waste lots of ink with the head cleaning function. Clean heads after using the cleaning solvent. Hope this helps. Jerry Share this post Link to post Share on other sites
Pcrat 65 Posted January 5, 2015 alright i can check it out! anything to help too! Thanks! where does the ink go when doing head cleans, isnt there a sponge or something, wont it get soaked need to be replaced?? Share this post Link to post Share on other sites
Wildgoose 4,200 Posted January 5, 2015 There is a big sponge-like inkpad that WILL eventually reach maximum and has to be changed. There are youtube vids to show how and I think you can even get some of the parts from Cobra Ink. Share this post Link to post Share on other sites