pereze76 0 Posted April 13, 2014 i have a question i just purchased the MH721. And its seems everytime i cut a job when i peel the vynil off there is alot of little small pieces like hair everywhere can someone help me please Share this post Link to post Share on other sites
skarekrow 1,842 Posted April 13, 2014 Could it be cutting around the file twice? Share this post Link to post Share on other sites
pereze76 0 Posted April 13, 2014 i m not sure i just cheked it .i have put a new blade and all the settings it at a .25 offset Share this post Link to post Share on other sites
Vermonster 111 Posted April 13, 2014 Cut a circle and watch it. See if it cuts it once or twice Share this post Link to post Share on other sites
Vermonster 111 Posted April 13, 2014 Let us know. If it's cutting twice try this http://forum.uscutter.com/index.php?/topic/11373-is-your-cutter-cutting-the-same-thing-more-than-once/ If it's only cutting once, please post the eps file so we can look at it to confirm the file is good 1 Share this post Link to post Share on other sites
mr300s 1,272 Posted April 13, 2014 You can also just look at the file in wire frame and you should be able to see if there is two layers 1 Share this post Link to post Share on other sites
