rob c 0 Posted March 25, 2008 would like toknow if longer seriel cable can be used cable supplied is to short for my location inst says to only use supplied cable is not fesible to use this one have sent to tech support no response just got machine :- Share this post Link to post Share on other sites
bk2design 1 Posted March 25, 2008 Tech support is one man, a mighty man named Kenimes. He will get back to you but in the meantime me and my fellow family members here will try to assist you. Using a longer cable shouldn't be much of a problem. How much longer are you talking? Share this post Link to post Share on other sites
Aardy54 0 Posted March 25, 2008 I got my Copam on approx 16' of usb cable & it works fine Got my Roland on a 25' parallel cable with no issues Make sure your connections are good and secure for machine and computer and as long as you aren't trying to stretch it 50', you should be okay. Share this post Link to post Share on other sites
BannerJohn 1,324 Posted March 25, 2008 For my main cutter I use a 6 foot serial with a 10 foot extension. No problems at all. Share this post Link to post Share on other sites
drdancan 0 Posted March 25, 2008 Using a 25 ft. serial cable to LaserPoint 24 with no problems here. Never tried USB. Share this post Link to post Share on other sites
rob c 0 Posted March 25, 2008 THANK FOR THE ANWSER TO MY QUESTION NEEDED TO RUN APPX 14 FT THANKS FOR THE HELP AM SUR WHILE LEARING SYSTEM WILL NEED MORE OFF TO GET CABLE Share this post Link to post Share on other sites