Tim1137 0 Posted January 31, 2013 I apologize if this is the wrong spot for this issue but I need help. I have Flexi v8.1 , and a USCutter MH 721. Previously I had a friend set up everything to get it working for me, but now it has randomly stopped working after I defragged my computer and restarted it. I opened production manager and my setup was not there and it asked me to create a new one. I fumbled through it and it doesnt work. I will click cut in th production manager and the cutter wont respond, itll just say cutting 0% on the production manager screen. I have the PNC-1000 Driver selected in the setup with the RTS and CTS boxes checked. I have selected COM3 port, because when I select COM1 it says it cannot open it. I must be missing something here please help me I am in the middle of a job. Operating system is Windows XP by the way Share this post Link to post Share on other sites
Pcrat 65 Posted February 4, 2013 i have that happen before, i uninstalled the us cutter driver, and uninstalled and reinstalled flexisign, that did the trick for me. but try that , uninstall the us cutter driver, reboot computer, reinstall driver. delete any setups in the program manager. Also if your USB cord is plugged into a different USB port on your pc then the one that was chosen when first installed, might be an issue, I cant use the serial cable, it wont talk to the machine, and when it does it goes all stair stepping cutting where it wants till it hits the end. It loves usb tho. Share this post Link to post Share on other sites