Ravenwind / One Off Grafx 187 Posted March 10, 2012 I have a job to do and cant find a clean eps of the Federated sign. I was talking with a guy at the office and he was helping but had a death in the family so he is not back to work yet. and the customer needs this sign done. Any help at all would be great. Any white in the image can be removed. Was hoping to lay down the yellow / orange then lay the blue over the top and use the white of the sign for all the open areas. Hope i said that plain enough it is late. this looks ok at a small size but when i go up to 30" it is rough. Thank you in advanced. Or even if someone has the logo stashed in some old file. Federated-Logo-color.eps Share this post Link to post Share on other sites
Sue2 920 Posted March 10, 2012 The logo enlarged fine for me...it may need a few node edits here and there but it is not rough. What you have is fine except to make it cut-ready.... learn to use your graphics program and the fix takes less than 5 five minutes. To cut, the lettering needs to be welded/punch through (or make compound path in AI). And all the black outlines need to be removed... including the separate piece around the "te". It would go together easier if you cut a solid blue and layer the orange, yellow and white...so I left the white "f". Sue2 Federated-Logo-color-2.eps 1 Share this post Link to post Share on other sites
Jay2703 704 Posted March 10, 2012 Found this on SeekLogo.com Jay Federated_Car_Care.eps 1 Share this post Link to post Share on other sites
daron 10 Posted March 11, 2012 this has 3 colors only no shite and no mask so just cut and let the white show hope this helps feds.eps 1 Share this post Link to post Share on other sites
Ravenwind / One Off Grafx 187 Posted March 13, 2012 Thank you everyone. All 3 look awesome ill try to get pics up when this project is done. Share this post Link to post Share on other sites