Robb 0 Posted December 30, 2011 Recently purchased an MH721, set everything up and running on a Mac (with Keyspan), grounded. Here's the thing - sometimes it works, sometimes it does not. Problems I'm experiencing: Random 45* cuts through image Cut will randomly continue ~6" above the cut, squiggles Image will be attempted to be cut multiple times And more.. I have no idea what I'm doing wrong or what I can do to check it. I have so much wasted vinyl because of this, very disappointed. The blade adjustment is fine. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted December 30, 2011 it could be the image, possibly post it... and you don't state what cutting software you are using, can only guess, Signcut maybe? Use a pen and paper until you find out the problem.. that way you won't waste vinyl. Share this post Link to post Share on other sites
Robb 0 Posted December 30, 2011 It's signcut. And it's not the image. The random cuts are different each time. Yeah, using signcut. And testing with a pen now. Share this post Link to post Share on other sites
Robb 0 Posted December 30, 2011 Drew this up quickly to test it with a new image. Here is the preview signcut shows of the image to be cut: Here is what is plotted with the pen: Link: http://img638.images...452/brokeny.jpg The machine also required me to reset it when it stopped plotting. Share this post Link to post Share on other sites
MZ SKEETER 4,709 Posted December 30, 2011 post that .eps file ... are you using the correct driver in Signcut? Share this post Link to post Share on other sites
Robb 0 Posted December 30, 2011 I just got off of the phone with Support. We verified the correct settings in Signcut on Mac, and switched over to Windows, eliminating the Keyspan. Looks like it just simply doesn't work on my Mac. Waste of $35 and 15ft of Vinyl, plus more time since I'm going to have to design on my Mac and then switch to my Windows machine to cut. :| Share this post Link to post Share on other sites
BLUEFIRE9x 1 Posted January 2, 2012 Glad you figured it out. Maybee you can sign up for a drop box or something that way when you design and save on the Mac it is already there on the Cutter computer (Windows) Share this post Link to post Share on other sites